Date   

Icom Command MIC III

Brass Ring <brassring44@...>
 

Icom HM-162B VHF Microphone Command MIC III.  Like new condition; approximately 1 year old.  No scratches on face.  Cord is in excellent condition, stretchy and no cracks in the covering.  Compatible with many Icom radios.  $45.00 plus freight

--
Mark Mueller
email - brass.ring@...


Icom Command MIC III

Brass Ring <brassring44@...>
 

Icom HM-162B VHF Microphone Command MIC III.  Like new condition; approximately 1 year old.  No scratches on face.  Cord is in excellent condition, stretchy and no cracks in the covering.  Compatible with many Icom radios.  $45.00 plus freight

--
Mark Mueller
email - brass.ring@...


Re: SM mast access cover plate

John Clark <john.biohead@...>
 

Excellent THX for the update.


On Tue, May 19, 2020 at 6:22 PM Alan Leslie <s.v.elyse@...> wrote:

Thierry is there at SAV.

I just ordered some stuff with him.

 

Alan

Elyse SM437

 

From: ShareParts@AmelYachtOwners.groups.io [mailto:ShareParts@AmelYachtOwners.groups.io] On Behalf Of John Clark
Sent: Wednesday, 20 May 2020 04:53
To: ShareParts@amelyachtowners.groups.io
Subject: Re: [ShareParts] SM mast access cover plate

 

Not yet.  I understand they are closed due to Covid.  

 

On Sun, May 17, 2020 at 6:39 PM CW Bill Rouse <brouse@...> wrote:

I assume you tried Amel. At one time they had a bin full of these. But when they are gone, they are gone.

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

 

View My Training Calendar

 

 

On Sat, May 16, 2020 at 7:19 AM John Clark via groups.io <biohead=rocketmail.com@groups.io> wrote:

Hi All,
   My original cover plate at the base of the main mast had a 24v power plug mounted on it for which I do not have a use, but which developed a leak and shorted out, so I am replacing it with my spare blank cover.  I would like to have another blank coverplate in the spares locker.   Does anyone know if the access plate is an Amel specific part?  See the photo.  I looked through WestMarine and Defender catalogs and have not found one.  Am I using the right terminology?




John Clark
SV Annie SM 37
Water Island USVI


Re: SM mast access cover plate

Alan Leslie
 

Thierry is there at SAV.

I just ordered some stuff with him.

 

Alan

Elyse SM437

 

From: ShareParts@AmelYachtOwners.groups.io [mailto:ShareParts@AmelYachtOwners.groups.io] On Behalf Of John Clark
Sent: Wednesday, 20 May 2020 04:53
To: ShareParts@amelyachtowners.groups.io
Subject: Re: [ShareParts] SM mast access cover plate

 

Not yet.  I understand they are closed due to Covid.  

 

On Sun, May 17, 2020 at 6:39 PM CW Bill Rouse <brouse@...> wrote:

I assume you tried Amel. At one time they had a bin full of these. But when they are gone, they are gone.

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

 

View My Training Calendar

 

 

On Sat, May 16, 2020 at 7:19 AM John Clark via groups.io <biohead=rocketmail.com@groups.io> wrote:

Hi All,
   My original cover plate at the base of the main mast had a 24v power plug mounted on it for which I do not have a use, but which developed a leak and shorted out, so I am replacing it with my spare blank cover.  I would like to have another blank coverplate in the spares locker.   Does anyone know if the access plate is an Amel specific part?  See the photo.  I looked through WestMarine and Defender catalogs and have not found one.  Am I using the right terminology?




John Clark
SV Annie SM 37
Water Island USVI


Re: SM mast access cover plate

John Clark <john.biohead@...>
 

Not yet.  I understand they are closed due to Covid.  


On Sun, May 17, 2020 at 6:39 PM CW Bill Rouse <brouse@...> wrote:
I assume you tried Amel. At one time they had a bin full of these. But when they are gone, they are gone.
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Sat, May 16, 2020 at 7:19 AM John Clark via groups.io <biohead=rocketmail.com@groups.io> wrote:
Hi All,
   My original cover plate at the base of the main mast had a 24v power plug mounted on it for which I do not have a use, but which developed a leak and shorted out, so I am replacing it with my spare blank cover.  I would like to have another blank coverplate in the spares locker.   Does anyone know if the access plate is an Amel specific part?  See the photo.  I looked through WestMarine and Defender catalogs and have not found one.  Am I using the right terminology?




John Clark
SV Annie SM 37
Water Island USVI


Re: SM mast access cover plate

 

I assume you tried Amel. At one time they had a bin full of these. But when they are gone, they are gone.
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Sat, May 16, 2020 at 7:19 AM John Clark via groups.io <biohead=rocketmail.com@groups.io> wrote:
Hi All,
   My original cover plate at the base of the main mast had a 24v power plug mounted on it for which I do not have a use, but which developed a leak and shorted out, so I am replacing it with my spare blank cover.  I would like to have another blank coverplate in the spares locker.   Does anyone know if the access plate is an Amel specific part?  See the photo.  I looked through WestMarine and Defender catalogs and have not found one.  Am I using the right terminology?




John Clark
SV Annie SM 37
Water Island USVI


SM mast access cover plate

John Clark
 

Hi All,
   My original cover plate at the base of the main mast had a 24v power plug mounted on it for which I do not have a use, but which developed a leak and shorted out, so I am replacing it with my spare blank cover.  I would like to have another blank coverplate in the spares locker.   Does anyone know if the access plate is an Amel specific part?  See the photo.  I looked through WestMarine and Defender catalogs and have not found one.  Am I using the right terminology?




John Clark
SV Annie SM 37
Water Island USVI


Bow Thruster foot for sale Super Maramu 2000

Alexandre Uster von Baar
 

After the boat was raised by the salvage company, I removed the bow thruster. 
To my surprised, there was very little water in the oil (look at the pictures). 
I removed the oil and added Corrosion X.  
The gear inside had just been changed, was only used 15 seconds. I paid 424 Euro for the gear alone.

Comes with all the parts shown in the 3rd picture (include a complete rebuilt kit and the Amel tool).  
Asking $1800



Rest of my parts for sale visible on:  http://nikimat.com/parts_for_sale/
I will update that page on a regular basis.

Sincerely, Alexandre


Re: Raymarine E90W MFD #SELL

Jarek Zemlo
 

Hello Woody,

I am in Belgium in the port of Oostende.

--
Jarek Zemlo
NOA BLUE


Re: Raymarine E90W MFD #SELL

Alan "Woody" Wood
 

On Fri, Mar 6, 2020 at 02:31 PM, Jarek Zemlo wrote:
Hello,

I have Raymarine E90W in very good condition. Selling due to change of Navigation system on my SM.
--
Jarek Zemlo
NOA BLUE

 Where are you at the moment Jarek? We’d be interested but in Spain at the moment.
Woody


Genoa, Main and Mizzen Sails for sale Super Maramu 2000

Alexandre Uster von Baar
 

Genoa, Main and Mizzen Sails Super Maramu 2000


Mizzen sail Hydranet.  

Like Brand NEW, very little use, still crispy.  

Paid $4290 asking $2000

http://nikimat.com/factures/2013_11_13_banks_sail_mizzen_sail.jpg


Genoa sail:

DEME Sail, estimated 35% to 40% wear, need bi-annual restitching

Would prefer a professional sail maker give estimate of wear.  

Asking $2000


Main Sail:

DEME Sail, estimated 35% to 40% wear, need bi-annual restitching

Would prefer a professional sail maker give estimate of wear.  

Asking $1000


All need to go.  No reasonable offer refused, will combine.  

Located in Sint Maarten, prefer pick up.  


Note: the sails were removed from the boat and store in my hotel prior the hurricane, they have not been underwater, when I moved from the island they have been store in my container.  


More parts coming soon.


ZF 25 - 2.0 Gear box #SELL

Alexander Ramseyer
 

The gear box came with the originally installed Volvo D3-1110 in 2005. It works fine / never had a problem. The gear box run ca. 7'900 h when engine was changed from Volvo to Beta Marine.
Ratio: 1.97
S/N 18148P
P/N 3315002010


Mircowave - Amel 54 2009 #SELL

Stefan Schaufert
 

Hello Amelians,

our micro wave.
It seems and looks like new. We never used it and want to sell/ making space for a electric stove.
If anybody is interested do not hesitate to contact me.
Currently we are around Martinique.

Best regards
Stefan
A54 N°119 Lady Charlyette




Sold: Sunbed upholstery for AMEL 54 2009 #SELL

Stefan Schaufert
 

Hello Amelians,

the sunbed upholstery has a new happy owner now.

Next thing:
The micro wave.
It seems and looks like new. We never used it and want to sell/ making space for a electric stove.
If anybody is interested do not hesitate to contact me.
Currently we are around Martinique.

Best regards
Stefan
A54 N°119 Lady Charlyette


Re: Mastervolt 24V, 110A Alternator for sale

MICHELE LUCCIOLA
 

Hello Alexander,
Does the alternator comes with the regulator?
May you give me an idea of the shipping charge to Italy? (Rome zip 00141)
If possible pls  send me a pic to michelelucciol@...

Thanks
Michele


Re: Mastervolt 24V, 110A Alternator for sale

 

That is a very good price. 

Best,

CW Bill Rouse
Amel Owners Yacht School - www.AmelOwnersYachtSchool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

On Tue, Jan 21, 2020, 12:00 PM Alexander Ramseyer <alexramseyer@...> wrote:
Due to a change form Volvo D3-110 to Beta Marine I sell this alternator. It has been bought new in spring 2017 and was used for ca. 500h. The new price at Electec in Saint Martin was USD 1470.00, sells now for USD 470.00.


Mastervolt 24V, 110A Alternator for sale

Alexander Ramseyer
 

Due to a change form Volvo D3-110 to Beta Marine I sell this alternator. It has been bought new in spring 2017 and was used for ca. 500h. The new price at Electec in Saint Martin was USD 1470.00, sells now for USD 470.00.


Swimming ladder for Santorin, SM or SM2K in excellent conditions #SELL

Olaf Bauer <olaf.bauer@...>
 

Hello AMELians,

I have a swimming ladder to sell for the back side of a Santorin, a SM or a SM2K. The ladder is in excellent conditions.

Swimming ladder with wooden steps (teak steps)
Diameter of steel tube is ca. 4,5cm

 

foldable ladder; two parts; for a diagonal stern

- First part of the ladder L53cm x W33cm incl 2 wooden steps; was mounted at the stern side
- Second part of the ladder is L92cm x W33cm incl 4 wooden steps


Asking USD80.00

Currently in TT. Sailing north the Caribbean islands in November.

Fair winds

Olaf

 

S/V Katchopine, SM2K 392

currently in TT


Re: B&G Masthead Wind Instument Parts

Alexander Ramseyer
 

Hi Ian,
 
is your unit still available?
 
Do you know the part no of it (just to be sure we talk about the same)?
Where is the unit and how much do you want for it?
Thanks, Alex
 
 
Gesendet: Samstag, 31. August 2019 um 07:46 Uhr
Von: "Ian Townsend" <smlocalola@...>
An: ShareParts@AmelYachtOwners.groups.io
Betreff: [ShareParts] B&G Masthead Wind Instument Parts
I have a spare set of B&G MHU wind angle vane and wind speed cups.
 
 
 


Mango #29 - 35 Years of logs & charts for return to owner/family/cruisers

Charles Bell
 

Available: A massive library of charts, maps, detailed daily sailing records, and other records from 35+ years of Mango #29's cruising. These are not for sale. I am trying to return them to the owner, crew, family & friends, or anyone else who would like to preserve it. 

There are 35+ years of charts, logs, and other records of sailing in the Med, Europe, and a list of places too long to list. The stack of charts is 6 inches thick, weighs 20kg+, and contains endless pages of notes. In short, this is someone's family history, possibly the history of a few cruisers. There is simply too much to list, most of it carefully organized with some documents dating to 1948.

I cannot imagine the value of such a trove of records to a family historian and the thought of disposing of the archive without attempting to return or preserve it is unconscionable to me. 

Mango #29 was formerly named "Windrush" or "Jes Sea" or under any of the previous names. We know she was first purchased by a gentleman in Greece and then sold to a Brittish owner.

Please contact me if you have an interest in the cache of documents.



Thank you,

Charles

21 - 40 of 57