Date   

Volvo D3-110 I A parts for sale #SELL

Alexander Ramseyer
 
Edited

Dear AMEL 54 / Volvo D3 owner,

due to an engine change to Beta Marine, my Volvo spares are for sale. This is an updated version of a former post that I deleted as some of the units have been sold and some new parts are for sale, like e.g. the brand-new prop that I have to change due to the unforeseen change to the new main engine.

Electronic Black Box (programmable / updatable)                                                                         

Oil Filter (1)
36mm nut (needed to open the oil filter housing)                                                                                                 

Fuel Filter (3)                                                                                               

Fuel Filter (Hengst) 2                                                                                

Air Filter (2)                                                                                  

Drive Belt (supports 2 Alternators, raw water pump (1)                  

Belt Tensioner (for long belt)                                                                  

Timing Belt (2)                                                                                            

Manual Fuel Pump Kit                                                

Raw Water Pump (refurbished, never used since)                                                                         

Seal to raw water pump (827247)                                                          

12V Bosch original Alternator (refurbished 2019, never used)      

24V, 110A Mastervolt Alternator (500h), incl. original Regulator 

Alternator Placebo                                                                                    

Starter Solenoid (Valeo)                                                                           

Instrument: Warning lamps                                                                    

Instrument: RPM gauge                                                                           

High pressure fuel pump                                                                                                                       

Anode (1)                                                                                                                                                                                

Oil cooler (Bowman original), used only 1 month              

ZF Gear Box (used, not refurbished, worked well)

3 Blade Propeller, AutoProp (self pitching, feathering prop) – used for only 40h


Re: B&G Hydra 2, B&G Processor & B&G analog instuments wind speed, boat speed, depth, wind direction #SELL

Jarek Zemlo
 

Hello Jan

Yes I have. If you are interested you can reach me on my mobile from tomorrow onwards +48 660508366 or E: noa_blue@...

Happy New Year
Jarek Zemlo
S/Y NOA BLUE
SM 201


Re: B&G Hydra 2, B&G Processor & B&G analog instuments wind speed, boat speed, depth, wind direction #SELL

Jan Burgers <jan.burgers@...>
 

Jarek, January 2021 now.. you still have those hydra 2 items availlable?


#SELL more stuff for an AMEL 54 - cockpit curtain, update 2: barmar control box, battens for main + mizzen, still the microwave #SELL

Stefan Schaufert
 

Dear Ameliens,

sorry again, but the:
Barmar control box (original, E14)
is not working properly any more (turns only one way).

Thus I do not want to sell it any more.

Best regards
Stefan
A54 #119 Lady Charlyette currently in Luperon, Dominican Republic, soon in the Bahamas


#SELL more stuff for an AMEL 54 - cockpit curtain, update: barmar control box, battens for main + mizzen, still the microwave #SELL

Stefan Schaufert
 

Dear Ameliens,

sorry, but the:
- Barmar control box (original, E14)
is a used one.

If anybody is interested or need pictures, do not hesitate to contact me.

Best regards
Stefan
A54 #119 Lady Charlyette currently in Luperon, Dominican Republic, soon in the Bahamas


#SELL more stuff for an AMEL 54 - cockpit curtain, barmar control box, battens for main + mizzen, still the microwave #SELL

Stefan Schaufert
 

Dear Ameliens,

something (still) to sell:
- the original cockpit curtain in good conditon (zips to the aft end of the spray hood, keeps the front half of the cockpit dry, works very well, allows easy access to the winches and to look at the sails whilst actually sailing. The watch keeper is also kept dry even when running downwind).
- a Barmar control box (original, new/ never used)
- complete set of battens for the main (4 pieces) and the mizzen (3 pieces)
- SMEG microwave, original,
 seems and looks like new, never used it.

If anybody is interested or need pictures, do not hesitate to contact me.

Best regards
Stefan
A54 #119 Lady Charlyette currently in Luperon, Dominican Republic, soon in the Bahamas


SM2K Lewmar ELS control box 48000222 #BUY

Bob Ross
 

Hello,
Having trouble finding a supplier with this part. This is for the portside electric ST58 winch and the unit lives on the engine room forward bulkhead.
Does anyone have one for sale or know of a supplier with this unit on hand?
Thank you
Bob
#362 Charleston


Amel54 original SSB system for sale

Scott SV Tengah
 

I'm selling the original SSB system from my 2007 A54 #69. All 24v, so no converters needed. We've used it for almost 3 years and it's worked perfectly the entire time. We used it as our primary offshore long distance communications, email and weather download system for over 20 thousand nautical miles but we find that we're not using it as much as we used to once we got the sat phone, so I'm thinking of selling it.

If you don't have SSB from the shipyard, I believe many Amels have the wiring and grounding plate installed and ready for SSB installation.

The components are:

Icom M-801E with external speaker and telephone like handset

https://www.theboatwarehouse.com.au/chart-plotters-radar-radio/vhf-radios/icom-m801e-mf-hf-ssb-radio-telephone-with-class-e-dsc/

$3554 AUD = $2600 USD

 

Pactor II-PRO with Pactor 3 upgrade and usb connection. With the USB adaptor, you plug this directly into your computer if you want to use email/data. With good propagation, this will provide faster data transfers than Iridium satellite service.

$1249USD for equivalent new

http://www.farallon.us/webstore/index1.html?c45.html&1

 

Icom AT-141 auto tuner to allow the use of the wire stays as an antenna, as long as you add an insulator. We used it per Amel - the triadic between the main and mizzen masts were used as a DSC antenna and we used a whip antenna also.

https://www.bluesat.com/icom-hf-automatic-antenna-tuner.html

$527 new

The new pricing was around $2600+1249+527 = 4376 USD and it works perfectly and was selected by Amel for our 24v boats.

I'd like to sell the whole package for $2500USD, which is more than a 40% discount from new. We're in Hawaii now and can ship anywhere in the world.

-Scott


SM2K ballooner inner pole

Tim Melbourne <tim@...>
 

I'm looking for a replacement ballooner inner pole for a 2001 SM2K. One of mine seems to have been accidentally swapped out in a Guadeloupe yard for another Amel inner pole that is 30cm too short but otherwise identical (perhaps to a Santorin?).

If you know of one from a salvaged SM, please let me know.
Thanks,
Tim Melbourne
Third Wish SM2K #306


Re: New Sprayhood for Super Maramu

 

You will need to have one made locally.

A few years ago Amel (SAV"at"Amel.fr) had the original bimini cover in stock which was fabric coated on both sides with polypropylene.
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Thu, Aug 13, 2020 at 1:28 PM Roman Lawrence <roman.lawrence@...> wrote:
Need to habe a new Sprayhood with 2 hatches in the top for watching the mainsail. Dies anybody know Werke to get ?
Besteht regards
Roman Lawrence

--
Diese Nachricht wurde von meinem Android Mobiltelefon mit 1&1 Mail gesendet.


New Sprayhood for Super Maramu

Roman Lawrence
 

Need to habe a new Sprayhood with 2 hatches in the top for watching the mainsail. Dies anybody know Werke to get ?
Besteht regards
Roman Lawrence

--
Diese Nachricht wurde von meinem Android Mobiltelefon mit 1&1 Mail gesendet.


Re: Maramu Furling Mainsail never used Hydranet Triradial construction #SELL

 

Gary,

The sail is for a Maramu, NOT a Super Maramu😀

I have never been able to say to Gary Silver, I got you...but I can now!😀

Bill
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Tue, Jun 30, 2020 at 5:55 PM Gary Silver via groups.io <garysilver=mac.com@groups.io> wrote:
Bill:  I might be interested but the dimension I have from Amel for the Main sail are 

Luff (m) Leech (m) Foot (m)
15.50 15.91 4.51

This seems quire different from the above.  Why is the QSail so much smaller?

Gary


Re: Maramu Furling Mainsail never used Hydranet Triradial construction #SELL

Gary Silver <garysilver@...>
 

Bill:  I might be interested but the dimension I have from Amel for the Main sail are 

Luff (m) Leech (m) Foot (m)
15.50 15.91 4.51

This seems quire different from the above.  Why is the QSail so much smaller?

Gary


Maramu Furling Mainsail never used Hydranet Triradial construction #SELL

 

I have a QSail Maramu Furling Mainsail that has never been used made of Dimension Polyant Hydranet in a Triradial construction. Specs are:
Hydra Net (Tri-radial cut with HNR 343/433) Amel Maramu F. Main / 1984
White Sunbrella UV on the clew.
Luff: 13,40m
Leech: 13,70m
Foot: 4,00m
The current location of this sail is Galveston Island, Texas USA
The Special Pricing to Amel Owners for this sale is currently 2.597,00€. - Accepting offers over $1,800USD 

Bill Rouse
brouse"at"gmail.com


Davits for SM 2000

MICHELE LUCCIOLA
 

Hi everyone,
I have for sale a pair of davits produced in France specifically for the Super Maramu 2000 (I think they are suitable for other models). The davits are in good condition and are supplied with its original mounting kit.
Request 1.000 euros plus shipping from Italy. If you are interested email me at michelelucciol@....
Thanks for your attention
Fair Wind
 


Icom Command MIC III

Brass Ring <brassring44@...>
 

Icom HM-162B VHF Microphone Command MIC III.  Like new condition; approximately 1 year old.  No scratches on face.  Cord is in excellent condition, stretchy and no cracks in the covering.  Compatible with many Icom radios.  $45.00 plus freight

--
Mark Mueller
email - brass.ring@...


Icom Command MIC III

Brass Ring <brassring44@...>
 

Icom HM-162B VHF Microphone Command MIC III.  Like new condition; approximately 1 year old.  No scratches on face.  Cord is in excellent condition, stretchy and no cracks in the covering.  Compatible with many Icom radios.  $45.00 plus freight

--
Mark Mueller
email - brass.ring@...


Re: SM mast access cover plate

John Clark <john.biohead@...>
 

Excellent THX for the update.


On Tue, May 19, 2020 at 6:22 PM Alan Leslie <s.v.elyse@...> wrote:

Thierry is there at SAV.

I just ordered some stuff with him.

 

Alan

Elyse SM437

 

From: ShareParts@AmelYachtOwners.groups.io [mailto:ShareParts@AmelYachtOwners.groups.io] On Behalf Of John Clark
Sent: Wednesday, 20 May 2020 04:53
To: ShareParts@amelyachtowners.groups.io
Subject: Re: [ShareParts] SM mast access cover plate

 

Not yet.  I understand they are closed due to Covid.  

 

On Sun, May 17, 2020 at 6:39 PM CW Bill Rouse <brouse@...> wrote:

I assume you tried Amel. At one time they had a bin full of these. But when they are gone, they are gone.

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

 

View My Training Calendar

 

 

On Sat, May 16, 2020 at 7:19 AM John Clark via groups.io <biohead=rocketmail.com@groups.io> wrote:

Hi All,
   My original cover plate at the base of the main mast had a 24v power plug mounted on it for which I do not have a use, but which developed a leak and shorted out, so I am replacing it with my spare blank cover.  I would like to have another blank coverplate in the spares locker.   Does anyone know if the access plate is an Amel specific part?  See the photo.  I looked through WestMarine and Defender catalogs and have not found one.  Am I using the right terminology?




John Clark
SV Annie SM 37
Water Island USVI


Re: SM mast access cover plate

Alan Leslie
 

Thierry is there at SAV.

I just ordered some stuff with him.

 

Alan

Elyse SM437

 

From: ShareParts@AmelYachtOwners.groups.io [mailto:ShareParts@AmelYachtOwners.groups.io] On Behalf Of John Clark
Sent: Wednesday, 20 May 2020 04:53
To: ShareParts@amelyachtowners.groups.io
Subject: Re: [ShareParts] SM mast access cover plate

 

Not yet.  I understand they are closed due to Covid.  

 

On Sun, May 17, 2020 at 6:39 PM CW Bill Rouse <brouse@...> wrote:

I assume you tried Amel. At one time they had a bin full of these. But when they are gone, they are gone.

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

 

View My Training Calendar

 

 

On Sat, May 16, 2020 at 7:19 AM John Clark via groups.io <biohead=rocketmail.com@groups.io> wrote:

Hi All,
   My original cover plate at the base of the main mast had a 24v power plug mounted on it for which I do not have a use, but which developed a leak and shorted out, so I am replacing it with my spare blank cover.  I would like to have another blank coverplate in the spares locker.   Does anyone know if the access plate is an Amel specific part?  See the photo.  I looked through WestMarine and Defender catalogs and have not found one.  Am I using the right terminology?




John Clark
SV Annie SM 37
Water Island USVI


Re: SM mast access cover plate

John Clark <john.biohead@...>
 

Not yet.  I understand they are closed due to Covid.  


On Sun, May 17, 2020 at 6:39 PM CW Bill Rouse <brouse@...> wrote:
I assume you tried Amel. At one time they had a bin full of these. But when they are gone, they are gone.
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Sat, May 16, 2020 at 7:19 AM John Clark via groups.io <biohead=rocketmail.com@groups.io> wrote:
Hi All,
   My original cover plate at the base of the main mast had a 24v power plug mounted on it for which I do not have a use, but which developed a leak and shorted out, so I am replacing it with my spare blank cover.  I would like to have another blank coverplate in the spares locker.   Does anyone know if the access plate is an Amel specific part?  See the photo.  I looked through WestMarine and Defender catalogs and have not found one.  Am I using the right terminology?




John Clark
SV Annie SM 37
Water Island USVI

1 - 20 of 55