Date   
Re: Maramu Furling Mainsail never used Hydranet Triradial construction #SELL

Gary Silver <garysilver@...>
 

Bill:  I might be interested but the dimension I have from Amel for the Main sail are 

Luff (m) Leech (m) Foot (m)
15.50 15.91 4.51

This seems quire different from the above.  Why is the QSail so much smaller?

Gary

Maramu Furling Mainsail never used Hydranet Triradial construction #SELL

 

I have a QSail Maramu Furling Mainsail that has never been used made of Dimension Polyant Hydranet in a Triradial construction. Specs are:
Hydra Net (Tri-radial cut with HNR 343/433) Amel Maramu F. Main / 1984
White Sunbrella UV on the clew.
Luff: 13,40m
Leech: 13,70m
Foot: 4,00m
The current location of this sail is Galveston Island, Texas USA
The Special Pricing to Amel Owners for this sale is currently 2.597,00€. - Accepting offers over $1,800USD 

Bill Rouse
brouse"at"gmail.com

Davits for SM 2000

MICHELE LUCCIOLA
 

Hi everyone,
I have for sale a pair of davits produced in France specifically for the Super Maramu 2000 (I think they are suitable for other models). The davits are in good condition and are supplied with its original mounting kit.
Request 1.000 euros plus shipping from Italy. If you are interested email me at michelelucciol@....
Thanks for your attention
Fair Wind
 

Icom Command MIC III

Brass Ring <brassring44@...>
 

Icom HM-162B VHF Microphone Command MIC III.  Like new condition; approximately 1 year old.  No scratches on face.  Cord is in excellent condition, stretchy and no cracks in the covering.  Compatible with many Icom radios.  $45.00 plus freight

--
Mark Mueller
email - brass.ring@...

Icom Command MIC III

Brass Ring <brassring44@...>
 

Icom HM-162B VHF Microphone Command MIC III.  Like new condition; approximately 1 year old.  No scratches on face.  Cord is in excellent condition, stretchy and no cracks in the covering.  Compatible with many Icom radios.  $45.00 plus freight

--
Mark Mueller
email - brass.ring@...

Re: SM mast access cover plate

John Clark <john.biohead@...>
 

Excellent THX for the update.


On Tue, May 19, 2020 at 6:22 PM Alan Leslie <s.v.elyse@...> wrote:

Thierry is there at SAV.

I just ordered some stuff with him.

 

Alan

Elyse SM437

 

From: ShareParts@AmelYachtOwners.groups.io [mailto:ShareParts@AmelYachtOwners.groups.io] On Behalf Of John Clark
Sent: Wednesday, 20 May 2020 04:53
To: ShareParts@amelyachtowners.groups.io
Subject: Re: [ShareParts] SM mast access cover plate

 

Not yet.  I understand they are closed due to Covid.  

 

On Sun, May 17, 2020 at 6:39 PM CW Bill Rouse <brouse@...> wrote:

I assume you tried Amel. At one time they had a bin full of these. But when they are gone, they are gone.

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

 

View My Training Calendar

 

 

On Sat, May 16, 2020 at 7:19 AM John Clark via groups.io <biohead=rocketmail.com@groups.io> wrote:

Hi All,
   My original cover plate at the base of the main mast had a 24v power plug mounted on it for which I do not have a use, but which developed a leak and shorted out, so I am replacing it with my spare blank cover.  I would like to have another blank coverplate in the spares locker.   Does anyone know if the access plate is an Amel specific part?  See the photo.  I looked through WestMarine and Defender catalogs and have not found one.  Am I using the right terminology?




John Clark
SV Annie SM 37
Water Island USVI

Re: SM mast access cover plate

Alan Leslie
 

Thierry is there at SAV.

I just ordered some stuff with him.

 

Alan

Elyse SM437

 

From: ShareParts@AmelYachtOwners.groups.io [mailto:ShareParts@AmelYachtOwners.groups.io] On Behalf Of John Clark
Sent: Wednesday, 20 May 2020 04:53
To: ShareParts@amelyachtowners.groups.io
Subject: Re: [ShareParts] SM mast access cover plate

 

Not yet.  I understand they are closed due to Covid.  

 

On Sun, May 17, 2020 at 6:39 PM CW Bill Rouse <brouse@...> wrote:

I assume you tried Amel. At one time they had a bin full of these. But when they are gone, they are gone.

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

 

View My Training Calendar

 

 

On Sat, May 16, 2020 at 7:19 AM John Clark via groups.io <biohead=rocketmail.com@groups.io> wrote:

Hi All,
   My original cover plate at the base of the main mast had a 24v power plug mounted on it for which I do not have a use, but which developed a leak and shorted out, so I am replacing it with my spare blank cover.  I would like to have another blank coverplate in the spares locker.   Does anyone know if the access plate is an Amel specific part?  See the photo.  I looked through WestMarine and Defender catalogs and have not found one.  Am I using the right terminology?




John Clark
SV Annie SM 37
Water Island USVI

Re: SM mast access cover plate

John Clark <john.biohead@...>
 

Not yet.  I understand they are closed due to Covid.  


On Sun, May 17, 2020 at 6:39 PM CW Bill Rouse <brouse@...> wrote:
I assume you tried Amel. At one time they had a bin full of these. But when they are gone, they are gone.
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Sat, May 16, 2020 at 7:19 AM John Clark via groups.io <biohead=rocketmail.com@groups.io> wrote:
Hi All,
   My original cover plate at the base of the main mast had a 24v power plug mounted on it for which I do not have a use, but which developed a leak and shorted out, so I am replacing it with my spare blank cover.  I would like to have another blank coverplate in the spares locker.   Does anyone know if the access plate is an Amel specific part?  See the photo.  I looked through WestMarine and Defender catalogs and have not found one.  Am I using the right terminology?




John Clark
SV Annie SM 37
Water Island USVI

Re: SM mast access cover plate

 

I assume you tried Amel. At one time they had a bin full of these. But when they are gone, they are gone.
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Sat, May 16, 2020 at 7:19 AM John Clark via groups.io <biohead=rocketmail.com@groups.io> wrote:
Hi All,
   My original cover plate at the base of the main mast had a 24v power plug mounted on it for which I do not have a use, but which developed a leak and shorted out, so I am replacing it with my spare blank cover.  I would like to have another blank coverplate in the spares locker.   Does anyone know if the access plate is an Amel specific part?  See the photo.  I looked through WestMarine and Defender catalogs and have not found one.  Am I using the right terminology?




John Clark
SV Annie SM 37
Water Island USVI

SM mast access cover plate

John Clark
 

Hi All,
   My original cover plate at the base of the main mast had a 24v power plug mounted on it for which I do not have a use, but which developed a leak and shorted out, so I am replacing it with my spare blank cover.  I would like to have another blank coverplate in the spares locker.   Does anyone know if the access plate is an Amel specific part?  See the photo.  I looked through WestMarine and Defender catalogs and have not found one.  Am I using the right terminology?




John Clark
SV Annie SM 37
Water Island USVI

Bow Thruster foot for sale Super Maramu 2000

Alexandre Uster von Baar
 

After the boat was raised by the salvage company, I removed the bow thruster. 
To my surprised, there was very little water in the oil (look at the pictures). 
I removed the oil and added Corrosion X.  
The gear inside had just been changed, was only used 15 seconds. I paid 424 Euro for the gear alone.

Comes with all the parts shown in the 3rd picture (include a complete rebuilt kit and the Amel tool).  
Asking $1800



Rest of my parts for sale visible on:  http://nikimat.com/parts_for_sale/
I will update that page on a regular basis.

Sincerely, Alexandre

Raymarine AIS650 #SELL

Jarek Zemlo
 

I have AIS650 from Raymarine very good shape and fully functioning. Location Belgium.

Jarek Zemlo
NOA BLUE

Re: Raymarine E90W MFD #SELL

Jarek Zemlo
 

Hello Woody,

I am in Belgium in the port of Oostende.

--
Jarek Zemlo
NOA BLUE

Re: Raymarine E90W MFD #SELL

Alan "Woody" Wood
 

On Fri, Mar 6, 2020 at 02:31 PM, Jarek Zemlo wrote:
Hello,

I have Raymarine E90W in very good condition. Selling due to change of Navigation system on my SM.
--
Jarek Zemlo
NOA BLUE

 Where are you at the moment Jarek? We’d be interested but in Spain at the moment.
Woody

Raymarine E90W MFD #SELL

Jarek Zemlo
 

Hello,

I have Raymarine E90W in very good condition. Selling due to change of Navigation system on my SM.
--
Jarek Zemlo
NOA BLUE

B&G Hydra 2, B&G Processor & B&G analog instuments wind speed, boat speed, depth, wind direction #SELL

Jarek Zemlo
 

From my Amel SM have in good condition and all functioning B&G Hydra 2, B&G Processor & B&G analogue instruments wind speed, boat speed, depth, wind direction
--
Jarek Zemlo
NOA BLUE

A/C VECO EV 8 SPLIT RC

Jarek Zemlo
 

I have 2 A/C units from my AMEL SM (1997) for sale with all additional equipment. I am taking the A/C away because of personal preferences. All in good working condition.
--
Jarek Zemlo
NOA BLUE

Genoa, Main and Mizzen Sails for sale Super Maramu 2000

Alexandre Uster von Baar
 

Genoa, Main and Mizzen Sails Super Maramu 2000


Mizzen sail Hydranet.  

Like Brand NEW, very little use, still crispy.  

Paid $4290 asking $2000

http://nikimat.com/factures/2013_11_13_banks_sail_mizzen_sail.jpg


Genoa sail:

DEME Sail, estimated 35% to 40% wear, need bi-annual restitching

Would prefer a professional sail maker give estimate of wear.  

Asking $2000


Main Sail:

DEME Sail, estimated 35% to 40% wear, need bi-annual restitching

Would prefer a professional sail maker give estimate of wear.  

Asking $1000


All need to go.  No reasonable offer refused, will combine.  

Located in Sint Maarten, prefer pick up.  


Note: the sails were removed from the boat and store in my hotel prior the hurricane, they have not been underwater, when I moved from the island they have been store in my container.  


More parts coming soon.

ZF 25 - 2.0 Gear box #SELL

Alexander Ramseyer
 

The gear box came with the originally installed Volvo D3-1110 in 2005. It works fine / never had a problem. The gear box run ca. 7'900 h when engine was changed from Volvo to Beta Marine.
Ratio: 1.97
S/N 18148P
P/N 3315002010

Mircowave - Amel 54 2009 #SELL

Stefan Schaufert
 

Hello Amelians,

our micro wave.
It seems and looks like new. We never used it and want to sell/ making space for a electric stove.
If anybody is interested do not hesitate to contact me.
Currently we are around Martinique.

Best regards
Stefan
A54 N°119 Lady Charlyette