The gear box came with the originally installed Volvo D3-1110 in 2005. It works fine / never had a problem. The gear box run ca. 7'900 h when engine was changed from Volvo to Beta Marine. Ratio: 1.97

Genoa, Main and Mizzen Sails Super Maramu 2000 Mizzen sail Hydranet. Like Brand NEW, very little use, still crispy. Paid $4290 asking $2000 http://nikimat.com/factures/2013_11_13_banks_sail_mizzen_sai

Hello, I have Raymarine E90W in very good condition. Selling due to change of Navigation system on my SM. Location in Poland. Can ship abroad. *Jarek Zemlo* *NOA BLUE SM #201 *

After the boat was raised by the salvage company, I removed the bow thruster. To my surprised, there was very little water in the oil (look at the pictures). I removed the oil and added Corrosion X. T

Hi All, My original cover plate at the base of the main mast had a 24v power plug mounted on it for which I do not have a use, but which developed a leak and shorted out, so I am replacing it with my

Icom HM-162B VHF Microphone Command MIC III. Like new condition; approximately 1 year old. No scratches on face. Cord is in excellent condition, stretchy and no cracks in the covering. Compatible with

Hi everyone, I have for sale a pair of davits produced in France specifically for the Super Maramu 2000 (I think they are suitable for other models). The davits are in good condition and are supplied

I have a QSail Maramu Furling Mainsail that has never been used made of Dimension Polyant Hydranet in a Triradial construction. Specs are: Hydra Net (Tri-radial cut with HNR 343/433) Amel Maramu F. Ma

Need to habe a new Sprayhood with 2 hatches in the top for watching the mainsail. Dies anybody know Werke to get ? Besteht regards Roman Lawrence -- Diese Nachricht wurde von meinem Android Mobiltelef

I'm looking for a replacement ballooner inner pole for a 2001 SM2K. One of mine seems to have been accidentally swapped out in a Guadeloupe yard for another Amel inner pole that is 30cm too short but

I'm selling the original SSB system from my 2007 A54 #69. All 24v, so no converters needed. We've used it for almost 3 years and it's worked perfectly the entire time. We used it as our primary offsho

Hello, Having trouble finding a supplier with this part. This is for the portside electric ST58 winch and the unit lives on the engine room forward bulkhead. Does anyone have one for sale or know of a

Dear Ameliens, something (still) to sell: - the original cockpit curtain in good conditon (zips to the aft end of the spray hood, keeps the front half of the cockpit dry, works very well, allows easy

Dear Ameliens, sorry, but the: - Barmar control box (original, E14) is a used one. If anybody is interested or need pictures, do not hesitate to contact me. Best regards Stefan A54 #119 Lady Charlyett

Dear Ameliens, sorry again, but the: - Barmar control box (original, E14) is not working properly any more (turns only one way). Thus I do not want to sell it any more. Best regards Stefan A54 #119 La

From my AMEL SM have in good condition and all functioning B&G Hydra 2, B&G Processor & B&G analogue instruments wind speed, boat speed, depth, wind direction. Location Poland and can do shipping abro

Dear AMEL 54 / Volvo D3 owner, due to an engine change to Beta Marine, my Volvo spares are for sale. This is an updated version of a former post that I deleted as some of the units have been sold and

This Yanmar 4JH3HTE is in perfect working condition. It has about 7200 hours on it. Recently changed turbo and injector nozzles. It works fine . starts immediately, no smoke, all fluid reports from Ca

I have a fully functional B&G gold vane mast head unit. I believe it is a Type C. from around 1985. Just serviced by a B&G authorized service center who installed new bearings. A totally electro-mecha