|
sticky
New Subgroup: ShareParts
Due to numerous requests, we have added a new subgroup which is ShareParts ( https://amelyachtowners.groups.io/g/ShareParts ). This is a subgroup of Amel Yacht Owners Group. Membership is limited to m
Due to numerous requests, we have added a new subgroup which is ShareParts ( https://amelyachtowners.groups.io/g/ShareParts ). This is a subgroup of Amel Yacht Owners Group. Membership is limited to members of Amel Yacht Owners Group. The purpose of this subgroup is to have a place where Amel yacht owners can post parts wanted or extra parts for sale. We want to ensure that this group does not interfere with parts sales by SAV@.... NO COMMERCIAL LISTINGS. It is important that when you no longer have something for sale, and/or if you have found the part you are looking for, that you update your Original Topic by either deleting it or by replying to the Original Topic. If this is not done, the subgroup messages will become a meaningless list and we will be forced to delete it. This is a link to the Message Topics: https://amelyachtowners.groups.io/g/ShareParts/topics This is an email address that allows you to post a New Topic in SpareParts, even if you have not joined the subgroup: ShareParts@AmelYachtOwners.groups.io *Here are all other SpareParts email addresses you can use:* * Subscribe: ShareParts+subscribe@AmelYachtOwners.groups.io * Unsubscribe: ShareParts+unsubscribe@AmelYachtOwners.groups.io * Group Owner: ShareParts+owner@AmelYachtOwners.groups.io * Help: ShareParts+help@AmelYachtOwners.groups.io Best, CW Bill Rouse
By CW Bill Rouse
·
|
|
Rare "Gold Vane wind sensor (mast top unit)
I have a fully functional B&G gold vane mast head unit. I believe it is a Type C. from around 1985. Just serviced by a B&G authorized service center who installed new bearings. A totally electro-mecha
|
I have a fully functional B&G gold vane mast head unit. I believe it is a Type C. from around 1985. Just serviced by a B&G authorized service center who installed new bearings. A totally electro-mecha
|
By Steve Leeds
·
|
|
Yanmar Engine excellent working Condition 4JH3HTE
This Yanmar 4JH3HTE is in perfect working condition. It has about 7200 hours on it. Recently changed turbo and injector nozzles. It works fine . starts immediately, no smoke, all fluid reports from Ca
|
This Yanmar 4JH3HTE is in perfect working condition. It has about 7200 hours on it. Recently changed turbo and injector nozzles. It works fine . starts immediately, no smoke, all fluid reports from Ca
|
By eric freedman
·
|
|
Volvo D3-110 I A parts for sale
#SELL
Dear AMEL 54 / Volvo D3 owner, due to an engine change to Beta Marine, my Volvo spares are for sale. This is an updated version of a former post that I deleted as some of the units have been sold and
|
Dear AMEL 54 / Volvo D3 owner, due to an engine change to Beta Marine, my Volvo spares are for sale. This is an updated version of a former post that I deleted as some of the units have been sold and
|
By Alexander Ramseyer
·
|
|
B&G Hydra 2, B&G Processor & B&G analog instuments wind speed, boat speed, depth, wind direction 3 messages
#SELL
From my AMEL SM have in good condition and all functioning B&G Hydra 2, B&G Processor & B&G analogue instruments wind speed, boat speed, depth, wind direction. Location Poland and can do shipping abro
|
From my AMEL SM have in good condition and all functioning B&G Hydra 2, B&G Processor & B&G analogue instruments wind speed, boat speed, depth, wind direction. Location Poland and can do shipping abro
|
By Jarek Zemlo
·
|
|
#SELL more stuff for an AMEL 54 - cockpit curtain, update 2: barmar control box, battens for main + mizzen, still the microwave
#SELL
Dear Ameliens, sorry again, but the: - Barmar control box (original, E14) is not working properly any more (turns only one way). Thus I do not want to sell it any more. Best regards Stefan A54 #119 La
|
Dear Ameliens, sorry again, but the: - Barmar control box (original, E14) is not working properly any more (turns only one way). Thus I do not want to sell it any more. Best regards Stefan A54 #119 La
|
By Stefan Schaufert
·
|
|
#SELL more stuff for an AMEL 54 - cockpit curtain, update: barmar control box, battens for main + mizzen, still the microwave
#SELL
Dear Ameliens, sorry, but the: - Barmar control box (original, E14) is a used one. If anybody is interested or need pictures, do not hesitate to contact me. Best regards Stefan A54 #119 Lady Charlyett
|
Dear Ameliens, sorry, but the: - Barmar control box (original, E14) is a used one. If anybody is interested or need pictures, do not hesitate to contact me. Best regards Stefan A54 #119 Lady Charlyett
|
By Stefan Schaufert
·
|
|
#SELL more stuff for an AMEL 54 - cockpit curtain, barmar control box, battens for main + mizzen, still the microwave
#SELL
Dear Ameliens, something (still) to sell: - the original cockpit curtain in good conditon (zips to the aft end of the spray hood, keeps the front half of the cockpit dry, works very well, allows easy
|
Dear Ameliens, something (still) to sell: - the original cockpit curtain in good conditon (zips to the aft end of the spray hood, keeps the front half of the cockpit dry, works very well, allows easy
|
By Stefan Schaufert
·
|
|
SM2K Lewmar ELS control box 48000222
#BUY
Hello, Having trouble finding a supplier with this part. This is for the portside electric ST58 winch and the unit lives on the engine room forward bulkhead. Does anyone have one for sale or know of a
|
Hello, Having trouble finding a supplier with this part. This is for the portside electric ST58 winch and the unit lives on the engine room forward bulkhead. Does anyone have one for sale or know of a
|
By Bob Ross
·
|
|
Amel54 original SSB system for sale
I'm selling the original SSB system from my 2007 A54 #69. All 24v, so no converters needed. We've used it for almost 3 years and it's worked perfectly the entire time. We used it as our primary offsho
|
I'm selling the original SSB system from my 2007 A54 #69. All 24v, so no converters needed. We've used it for almost 3 years and it's worked perfectly the entire time. We used it as our primary offsho
|
By Scott SV Tengah
·
|
|
SM2K ballooner inner pole
I'm looking for a replacement ballooner inner pole for a 2001 SM2K. One of mine seems to have been accidentally swapped out in a Guadeloupe yard for another Amel inner pole that is 30cm too short but
|
I'm looking for a replacement ballooner inner pole for a 2001 SM2K. One of mine seems to have been accidentally swapped out in a Guadeloupe yard for another Amel inner pole that is 30cm too short but
|
By
Tim Melbourne
·
|
|
New Sprayhood for Super Maramu 2 messages
Need to habe a new Sprayhood with 2 hatches in the top for watching the mainsail. Dies anybody know Werke to get ? Besteht regards Roman Lawrence -- Diese Nachricht wurde von meinem Android Mobiltelef
|
Need to habe a new Sprayhood with 2 hatches in the top for watching the mainsail. Dies anybody know Werke to get ? Besteht regards Roman Lawrence -- Diese Nachricht wurde von meinem Android Mobiltelef
|
By Roman Lawrence
·
|
|
Maramu Furling Mainsail never used Hydranet Triradial construction 3 messages
#SELL
I have a QSail Maramu Furling Mainsail that has never been used made of Dimension Polyant Hydranet in a Triradial construction. Specs are: Hydra Net (Tri-radial cut with HNR 343/433) Amel Maramu F. Ma
|
I have a QSail Maramu Furling Mainsail that has never been used made of Dimension Polyant Hydranet in a Triradial construction. Specs are: Hydra Net (Tri-radial cut with HNR 343/433) Amel Maramu F. Ma
|
By CW Bill Rouse
·
|
|
Davits for SM 2000
Hi everyone, I have for sale a pair of davits produced in France specifically for the Super Maramu 2000 (I think they are suitable for other models). The davits are in good condition and are supplied
|
Hi everyone, I have for sale a pair of davits produced in France specifically for the Super Maramu 2000 (I think they are suitable for other models). The davits are in good condition and are supplied
|
By MICHELE LUCCIOLA
·
|
|
Icom Command MIC III 2 messages
Icom HM-162B VHF Microphone Command MIC III. Like new condition; approximately 1 year old. No scratches on face. Cord is in excellent condition, stretchy and no cracks in the covering. Compatible with
|
Icom HM-162B VHF Microphone Command MIC III. Like new condition; approximately 1 year old. No scratches on face. Cord is in excellent condition, stretchy and no cracks in the covering. Compatible with
|
By
Brass Ring
·
|
|
SM mast access cover plate 5 messages
Hi All, My original cover plate at the base of the main mast had a 24v power plug mounted on it for which I do not have a use, but which developed a leak and shorted out, so I am replacing it with my
|
Hi All, My original cover plate at the base of the main mast had a 24v power plug mounted on it for which I do not have a use, but which developed a leak and shorted out, so I am replacing it with my
|
By John Clark
·
|
|
Bow Thruster foot for sale Super Maramu 2000
After the boat was raised by the salvage company, I removed the bow thruster. To my surprised, there was very little water in the oil (look at the pictures). I removed the oil and added Corrosion X. T
|
After the boat was raised by the salvage company, I removed the bow thruster. To my surprised, there was very little water in the oil (look at the pictures). I removed the oil and added Corrosion X. T
|
By Alexandre Uster von Baar
·
|
|
Raymarine E90W MFD 3 messages
#SELL
Hello, I have Raymarine E90W in very good condition. Selling due to change of Navigation system on my SM. Location in Poland. Can ship abroad. *Jarek Zemlo* *NOA BLUE SM #201 *
|
Hello, I have Raymarine E90W in very good condition. Selling due to change of Navigation system on my SM. Location in Poland. Can ship abroad. *Jarek Zemlo* *NOA BLUE SM #201 *
|
By Jarek Zemlo
·
|
|
Genoa, Main and Mizzen Sails for sale Super Maramu 2000
Genoa, Main and Mizzen Sails Super Maramu 2000 Mizzen sail Hydranet. Like Brand NEW, very little use, still crispy. Paid $4290 asking $2000 http://nikimat.com/factures/2013_11_13_banks_sail_mizzen_sai
|
Genoa, Main and Mizzen Sails Super Maramu 2000 Mizzen sail Hydranet. Like Brand NEW, very little use, still crispy. Paid $4290 asking $2000 http://nikimat.com/factures/2013_11_13_banks_sail_mizzen_sai
|
By Alexandre Uster von Baar
·
|
|
ZF 25 - 2.0 Gear box
#SELL
The gear box came with the originally installed Volvo D3-1110 in 2005. It works fine / never had a problem. The gear box run ca. 7'900 h when engine was changed from Volvo to Beta Marine. Ratio: 1.97
|
The gear box came with the originally installed Volvo D3-1110 in 2005. It works fine / never had a problem. The gear box run ca. 7'900 h when engine was changed from Volvo to Beta Marine. Ratio: 1.97
|
By Alexander Ramseyer
·
|
