Fisher, Thomas W.
I've had both mizzen and main swivels rebuilt. Getting them out of the mast is the work. Any machine shop will be able to rebuild/replace the units. There are bearings and seals inside that are easy enough to find. It was the seals that failed on our boat allowing water in and ultimitly corroding the bearings. I also had the machinist install a small grease fitting perhapes not needed but seemed like a good addition at the time. Good luck.
SHEILA, Sharki #142
From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of Gene
Sent: Tuesday, July 10, 2012 16:55
Subject: [Amel] Sharki roller furler Swivel Mizzen mast
Good day all,
Does anyone have a drawing or parts list for the Roller furler swivel mizzen mast?
Mine is in need of a rebuild.
Thanks in advance