Hi Bill & Hans,
I'm not sure I even have an oil cooler...will have to check when I get back on the boat.  I've not had water in the ATM fluid, so I guess it hasn't failed, but I'm wondering how you know if it's not functioning properly.  Is there a temp sensor somewhere?
Thanks,
Kent
1999 SM243
KRISTY


________________________________
From: Judy and Bill aboard SV BeBe <yahoogroups@...>
To: amelyachtowners@...
Sent: Wednesday, November 7, 2012 4:40 AM
Subject: [Amel] Re: oil cooler

 
Hans,

Did you see the reply from Eric: end cap part number: 3312307029

I had a problem with the cooler getting clogged with debris. Is it possible that this is your problem. If so, remove the forward end cap and vacuum out with a wet/dry vacuum.

I looked for a part number on the cooler and found none.

There are a number of photos at http://groups.yahoo.com/group/amelyachtowners/photos/album/1228643648/pic/list

Hope this helps.

Bill
BeBe, SM2k, #387
Currently Fethiye, Turkey

--- In mailto:amelyachtowners%40yahoogroups.com, "Hans-Joachim" <Dr.Hofschulte@...> wrote:

Hallo all,
Our gear box oil cooler (Bowman) is broken. As we are not on the boat, we need the code which is written on the rubber end covers between the oil cooler and the hose from the intake / to the impeller of the motor.
Our SM 2000 is #436, built in 2004. If someone has a
similar cooler and is on the boat to check the number, this would be of
great help, much appreciated.
Best regards Hans-Joachim

SM 2000 #436 Lisboa

[Non-text portions of this message have been removed]