Re: [Amel] SuperMaramu Windshield


we tried using lexan for years but it was just too much maintainance for our jewelry store..
we went to buletproof 1/4inch glass in our windows and doors will stop a m4 round.
however it doesnt take much to spiderweb it like a car window. i still believe that plexiglass is the best choice or my Amel.

sm 376

----- Original Message -----
From: islandbwoy4434
Date: Monday, July 8, 2013 1:08 pm
Subject: Re: [Amel] SuperMaramu Windshield
To: amelyachtowners@...

Eric, Can you please clarify your statement. Are you using built
proof glass as a wind shield?
I have to tackle Libby's Windshield before we depart on our
circumnavigation next year.
I have toyed with the idea of bullet proof/tempered glass.
Any considerations with this thought that we need to make?


--- In amelyachtowners@..., kimberlite@... wrote:

do you know where i can get 30mm hose for goes
between the sea chest and the tranny cooler?

Ps we used to use lexan in our jewelry stores as it is
stronger than plexiglass. however we found that it scratches
more easily than plexiglass. we now use bulletproof glass.
fair winds

----- Original Message -----
From: Richard03801
Date: Sunday, July 7, 2013 10:41 pm
Subject: Re: [Amel] SuperMaramu Windshield
To: "amelyachtowners@..."

Viet hi sorry about your window.
I west Annapolis is Marine Plastics they can make and
install a
new one. Might as well get both side done. We used lexan.
send you a photo in the AM.
In Newport on SM 209.

Richard Piller
Fairbanks Yacht Group llc
Amel specialist for the Northeast
Cell 603 767 5330

On Jul 7, 2013, at 17:48, "veitm@..." wrote:

Hello All:

Just dropped my windshield into the harbor...unrecoverable
unfortunately.Good news: hadn't started polishing yet
Bad news: need a new one.
Question: does anyone know the thickness of the original?
looks like either 10 or 12mm)
Also: Plexi or Polycarbonate - any experiences?

Last: can anybody suggest a good installer in the
Annapolis/Baltimore area?


Join { to automatically receive all group messages.