Re: [Amel] SuperMaramu Windshield


Anne and John Hollamby <annejohnholl@...>
 

Hi Richard, What is 210? Anne and John, Bali Hai, SM2k 319

From: Richard03801
Sent: Tuesday, July 9, 2013 4:18 AM
To: amelyachtowners@...
Subject: Re: [Amel] SuperMaramu Windshield


Further the reason we used Lexaan is one it is by far the strongest of the see through plastics. When it get scratched we can clear it using 210. And there are no issues when you mill or drill it. And yes it is bullet proof.
Regards
Richard Piller
FAIRBANKS YACHT GROUP LLC NEWPORT RI
AMEL SERVICE AND SUPPORT IN THE NORTHEAST
Cell 603 767 5330
mailto:Richard%40fairbanksyachts.com
On Jul 8, 2013, at 22:13, Richard03801 <mailto:richard03801%40yahoo.com> wrote:

Viet that window is 10 mm thick. Take care that the upper edge has about a 15 deg bevel.

Regards
Richard Piller
FAIRBANKS YACHT GROUP LLC NEWPORT RI
AMEL SERVICE AND SUPPORT IN THE NORTHEAST
Cell 603 767 5330
mailto:Richard%40fairbanksyachts.com

On Jul 8, 2013, at 6:39, Veit Mueller <mailto:veitm%40ymail.com> wrote:

All:

Does anyone know the thickness?
Cheers,
Veit

Sent from my vm iPad

On Jul 8, 2013, at 1:35 AM, mailto:kimberlite%40optonline.net wrote:

Richard,
do you know where i can get 30mm hose for kimberlite.it goes between the sea chest and the tranny cooler?

Ps we used to use lexan in our jewelry stores as it is stronger than plexiglass. however we found that it scratches more easily than plexiglass. we now use bulletproof glass.
fair winds
eric
sm376

----- Original Message -----
From: Richard03801
Date: Sunday, July 7, 2013 10:41 pm
Subject: Re: [Amel] SuperMaramu Windshield
To: "mailto:amelyachtowners%40yahoogroups.com"

Viet hi sorry about your window.
I west Annapolis is Marine Plastics they can make and install a
new one. Might as well get both side done. We used lexan. Will
send you a photo in the AM.
In Newport on SM 209.

Regards
Richard Piller
Fairbanks Yacht Group llc
Amel specialist for the Northeast
Cell 603 767 5330

On Jul 7, 2013, at 17:48, "mailto:veitm%40ymail.com" wrote:

Hello All:

Just dropped my windshield into the harbor...unrecoverable
unfortunately.Good news: hadn't started polishing yet
Bad news: need a new one.
Question: does anyone know the thickness of the original? (it
looks like either 10 or 12mm)
Also: Plexi or Polycarbonate - any experiences?

Last: can anybody suggest a good installer in the
Annapolis/Baltimore area?

Thanks,
Veit
SM215, ATMAN









[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.