Re: [Amel] Re: Volvo TMD22 max rpm
|
Alexandre Uster von Baar
Good morning Terry ?
toggle quoted message
Show quoted text
Thank you so much for the info on the cost. How about the cost to repitch the blade? Thanks in advance. -------------------------------------------- On Mon, 8/26/13, islandbwoy4434 <terencesingh@...> wrote:
Subject: [Amel] Re: Volvo TMD22 max rpm To: amelyachtowners@... Date: Monday, August 26, 2013, 8:49 AM Alexandre, here is what I paid. On visual inspection It does need a new bearing kit. All 3-blades bearings are worn & the blades loose on the hub. Cost for Bearing Kit - $851.83. Includes new bearings, Tamper proof plugs, Tab Washers, Expanding nut & bolt, zinc & shaft nut Locking Bolt & VC-3. Labour for Bearing replacement & pitch change - $367.50. Total - $1219.33 --- In amelyachtowners@..., Alexandre Uster von Baar <uster@...> wrote: > > Thanks Dena and ? Islandboy for the info! > More and more it seems the new prop wil lbe required... > > Just out of curiosity, how much was the total work on the H6 Auto Prop? > > Sincerely, Alexandre > > -------------------------------------------- > On Wed, 8/21/13, islandbwoy4434 <terencesingh@...> wrote: > > Subject: [Amel] Re: Volvo TMD22 max rpm > To: amelyachtowners@... > Date: Wednesday, August 21, 2013, 4:35 PM > > > > > > > > > > > > > > > > > Â > > > > > > > > > > My two cents worth after exhaustive analysis of low > max RPM's. > > Dena and I have owned Libby #196 for 18 months. > > We were never able to get more that 2000 RPM's @ 6.5 > knots out of the TMD22 with an H6 AutoProp. > > Replaced the Turbo, checked engine and transmission RPM with > optical Tach at 100RPM intervals both stationary at the dock > and sea trial. > > Cleaned exhaust elbow, checked fuel system, and a host of > other suggestions as noted in my thread. > > Consulted with AB Marine and Bruntons and provided tons of > empirical data. > > David Sheppard provided Geoff Prior of AB Marine a new > profile for the Prop. > > Prop also received a full service including new bearings. > > Prop was re-fitted last week. > > New results. > > Max RPM's 3000 @ 9 Knots+ > > 2500 RPM's @ 7.5knots > > > > Very happy that I can now run the TMD22 at a point where the > Turbo is actually working. > > Not sure why the H6 was pitched that way it was and supplied > to Amel. > > > > > > --- In amelyachtowners@..., > "Graham" <crwggb@> wrote: > > > > > > Straight forward question: > > > > > > If you have or have had a Volvo TMD22 in your Super > Maramu, what is the max RPM you ever achieved with the max > prop fitted? The more responses the better! > > > > > > Graham > > > SM 140 Sula > > > Hong Kong > > > > |
|
|