Thank you so much Eric! Really appreciate the info!
Any other parts I should really have?
Sincerely, Alexandre

--------------------------------------------
On Thu, 8/29/13, Sailorman wrote:

Subject: RE: [Amel] Re: Bearing sizes for Bow Thruster?
To: amelyachtowners@...
Date: Thursday, August 29, 2013, 5:34 PM


























Alexandre,



You will probably never need the bearings for the lower unit
on the bow

thruster. If you do they are standard metric bearings.



However there is a shaft that connects to the prop in the
bowthruster that

you might want to have, it is available only from amel and
is mae of some

sort of fiberglass type material.



Fair Winds



Eric



Amel Super Maramu #376 Kimberlite



_____



From: amelyachtowners@...

[mailto:amelyachtowners@...]
On Behalf Of Ann-Sofie Svanberg

Sent: Thursday, August 29, 2013 2:46 AM

To: amelyachtowners@...

Subject: Re: [Amel] Re: Bearing sizes for Bow Thruster?



There is no problem to write in english to Maud.



/Annsofie

S/Y Lady Annila

SM232 in Portugal, prepairing to cross the Atlantic



Skickat från min iPad



29 aug 2013 kl. 02:30 skrev "Alexandre Uster von
Baar" >

:

Thanks for the info John, I do feel bad asking for part

dimensions and not

order these from Amel. But on the other hand will admit I
still have not

digested the fact Amel (Martinique) charged me 462 Euro last
November (which

was about $600) for the Jabsco electric toilet pump, while I
later find

these for $250. I understand they need to make profit, but
this is greed...

Thanks again, sill contact Maud (in French), if the

price are too high,

will try in English!!!

Have a great evening, Alexandre

--------------------------------------------

On Wed, 8/28/13, jsrogers47 >
wrote:

Subject: [Amel] Re: Bearing sizes for Bow Thruster?

To: amelyachtowners@...

Date: Wednesday, August 28, 2013, 6:55 PM

Hi Alexandre. I ordered a set of bow thruster

seals from Maud by emailing her at Amelsav@...

Of

course, you may write to her in french. Just tell her

your

hull number and she will give you a price. I did not

get

bearings from her, but I imagine she could help with

that as

well.

--- In amelyachtowners@...

,

"Alex" wrote:

Does any one know for sure the bearing sizes for

the

bow thruster?

I want to stock on spare parts.

Thanks in advance.

Sincerely, Alexandre

SM2K #289 NIKIMAT

Seabrook, Texas, USA

[Non-text portions of this message have been removed]



_____



I am using the Free version of SPAMfighter

.

SPAMfighter has removed 1966 of my spam emails to date.



Do you have a slow PC? > PCfighter?cid=sigen>
Try a free scan!



[Non-text portions of this message have been removed]