Re: [Amel] RE: Cleaning the fresh water tanks
Thanks Bill. I'm having trouble getting it out, too. Like you I thought it was all glassed in. I gave it a good heave-ho and can raise the outboard end a little, but the inboard end won't budge...even a smidge. I've tried getting a screwdriver between the wooden panel and the lip of the bilge storage area under the dining table to get a little purchase, but still no-go. There doesn't appear to be anything holding it down from underneath, but the wooden panel in the walkway still seems to be fastened down somehow. Anyone have any other ideas?
Thanks,
Kent
SM243
Kristy
Brunswick GA USA
From: Bill & Judy Rouse
To: "amelyachtowners@..." Sent: Saturday, November 16, 2013 5:02 AM Subject: Re: [Amel] RE: Cleaning the fresh water tanks Ann-Sofie,
I thought the same thing when I was doing it...it looked like it was "glassed" to the hull. It is a very tight fit...when I finally had all of the 10 screws removed, it came up, but it was hard, almost like it was stuck...and it was hard to get back in place because it was so tight.
I hope that I did not leave anything out. I count 10 screws that must be removed...did you remove 10 screws and are you sure that they were the correct 10 screws according to the photo?
Bill On Sat, Nov 16, 2013 at 9:54 AM, Ann-Sofie Svanberg <kanalmamman@...> wrote:
|
|