I'm told that would cost $300-400. Would rather avoid that extra cost.

Kent

On May 19, 2014, at 10:51 PM, "sailormon kimberlite@... [amelyachtowners]" <amelyachtowners@...> wrote:

 

Why don’t you just order a new gypsy from Imtra that will fit whatever chain you want.

Fair Winds

Eric

Kimberlite SM 376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, May 19, 2014 3:15 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Re: Anchor Chain for Super Maramu 243

 

 

Curious...My gypsy isn't marked.  My old chain isn't marked.

I got samples:

 3/8"BBB which are 27mm inside length...it's too short to work on the gypsy I have.

3/8" G4 HT which are 31mm inside length...it seems to fit OK.

 

The old chain is 30mm inside length, 10mm dia...so over a 12 link length it's 12mm shorter than the HT.

 

Does anyone know what my old chain is? (10mm dis, 30mm inside length)  If it's G3, of good quality, and available in the US, that's what I'd like to buy, as it's probably significantly cheaper than the HT.  I guess it may be some cheaper Chinese stuff which might explain the severe rust problem.  I don't know what to call it, so I don't know what to search for.

 

Thanks,

Kent