Super Maramu Nav Lights

Graham Boyd

Just had failure of the nav lights on the pulpit. A quick check with multimeter shows voltage drop between anchor locker and lights failure in the wire. Rewiring the port Nav light relatively easy as wire goes straight up the pulpit leg from the locker. The starboard light not so easy. The wire runs up the port pulpit leg, all the way round the front of the forestay at the top level inside the pulpit and then down to the stdb light. When trying to pull this through...unsurprisingly the wire snapped. Short term solution, has been to run wire under deck to stdb sail locker, deck gland and external run up stdb pulpit leg to light. 

Has any one manged to rewire these lights as per the Amel original set up without removing the the pulpit completely?

Graham Boyd


SM 140

Hong Kong

Join to automatically receive all group messages.