Re: [Amel Yacht Owners] Re: Gas Strut for Engine Compartment lid


Germain Jean-Pierre <jgermain@...>
 

http://www.sgs-engineering.com/gas-struts

They might help....

Good luck.

Jean-Pierre



On 27 Jun 2014, at 16:39, 'Bill & Judy Rouse' yahoogroups@... [amelyachtowners] wrote:

 

I believe the specs for the Super Maramu Engine Hatch struts (gas springs) are:
  • 585mm extended 
  • 345mm closed
  • 8mm shaft
  • 10mm bolt hole
  • 400N - strength 
Bill
BeBe 387



On Fri, Jun 27, 2014 at 2:50 PM, 'John S. Rogers' jsrogers@... [amelyachtowners] <amelyachtowners@...> wrote:
 

I replaced my gas struts from Maud at Amel Chantier.  The cost was $ 133.85 for the pair including shipping.  You might think it high, but at least they were the right size and strength.

 

John

SM #105

Its Good

 





Posted by: "Bill & Judy Rouse"
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (4)

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.