Re: [Amel Yacht Owners] Re: Amel Shroud Covers
Yes it was rigid PVC, possibly the thicker walled stuff. I just slit it with a saw and closed it with zip ties covered by rigging tape. Last time I saw the boat, which was about 5 years from when I did it, it all looked intact. And of course it's cheap to renew any or all of those items.toggle quoted messageShow quoted text
---In amelyachtowners@..., <kimberlite@...> wrote :
Hi did you use rigid PVC.
If so did you split the PVC or did you just cut a slit in it?
Kimberlite SM 376
From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Saturday, January 03, 2015 3:45 PM
Subject: Re: [Amel Yacht Owners] Re: Amel Shroud Covers
I have not seen the Amel covers but I had impression they were somewhat tight fitting. The PVC pipe I used was quite a bit larger than the wire so as not to trap anything. Nathan Bossett who is on this list and now owns my former boat could say exactly but I think perhaps the inner diameter of the PVC is 20 or 22mm. It was open on the bottom so water could run freely.
On 29/12/2014 19:38, dave_benjamin@... [amelyachtowners] wrote: