Re: [Amel Yacht Owners] Re: Water Heater replacing the electric heating element

Bill & Judy Rouse <yahoogroups@...>

I am not sure about Amel being the reason because the Isotemp Basic 40 on BeBe was replaced while we were in New Zealand...Amel did not touch this one. 

Isotemp is doing something with those wire ties.

BeBe 387

On Wed, May 13, 2015 at 8:56 AM, galacsea2000 <no_reply@...> wrote:

Just for your info.

The wire ties you found in the water heater come from the fact that, in the old days, Amel used to install magnesium anodes inside the water heater. These anodes were tied to the heating element connected to the engine cooling mix.

Join to automatically receive all group messages.