Thanks! Very timely on this. We hauled Cream Puff today and will be doing the prop, Amel drive and bow thruster this week.

 

 

 

With best regards,

 

Mark

 

Super Maramu 2000

Hull #275

www.creampuff.us

Currently cruising:  Chesapeake Bay – On the hard in Solomon

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, August 31, 2015 9:50 AM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Bow thruster lip seals

 

 

Mark,

Yes,

I think using RTV on the propeller shaft seal improved the water tightness. Blue or Clear works. 

I guess that I should update the instructions in the files section.

Bill Rouse
BeBe Amel 53 #387
Sent from my tablet
+39 333 121 8115 Italy Mobile
+1832-380-4970 USA Voice Mail

On Aug 31, 2015 1:54 PM, "'Mark Erdos' mcerdos@... [amelyachtowners]" <amelyachtowners@...> wrote:

 

Bill,

I am a little confused (very normal for me). Are you saying to use blue RTV on the lower oil seal behind the prop? I was aware that RTV should be used on the upper 80mm lip seal inside the locker, but not the lower lip seal.

With best regards,

Mark

Super Maramu 2000

Hull #275

www.creampuff.us

Currently cruising: Chesapeake Bay - Solomon

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, August 31, 2015 4:31 AM
To: amelyachtowners@...; Alan Leslie
Subject: Re: [Amel Yacht Owners] Bow thruster lip seals

Alan,

Amel sent the following seal for the bow thruster shaft:
Paulstra
792521
IEL 30. 42. 7.
MI 1 VY

When installing it, use some RTV on the outside edge of the seal and make
sure that it is pressed all the way in. The space for the seal is about 9mm
deep and the seal is 7mm thick.

Bill Rouse
BeBe Amel 53 #387
Sent from my tablet
+39 333 121 8115 Italy Mobile
+1832-380-4970 USA Voice Mail
On Aug 31, 2015 9:52 AM, "divanz620@... [amelyachtowners]" <
amelyachtowners@...> wrote:

>
>
> Can anyone tell me please the specification for the lip seals on the
> propeller shaft in the foot of the bow thruster on a Super Maramu 2000 ?
>
> I've searched the messages but I can seem to find it.
>
> Thanks in advance
>
> Alan
>
> Elyse SM437
>
>



[Non-text portions of this message have been removed]