Re: [Amel Yacht Owners] Pipe for pushing seals into C-drive

Bill & Judy Rouse <yahoogroups@...>


I use the removed wear bushing reversed on the shaft to push the seals in. I drive the bushing in with a piece of pipe that slides over the end of the bushing that normally is inserted into the seals. My piece of pipe has an inside dimension of 52mm and a length of 23cm. It was a piece of scrap I found in the works, but it could be smaller.

Bill Rouse
BeBe Amel 53 #387
Sent from my tablet
+34 600 659 769 Spain Mobile
+1832-380-4970 USA Voice Mail

On Sep 3, 2015 8:58 AM, "divanz620@... [amelyachtowners]" <amelyachtowners@...> wrote:


Could someone give me the dimensions of the pipe you use to push the new seals over the propshaft and into the C-drive housing.



Elyse SM437

Join to automatically receive all group messages.