Thanks for the clarification.
I could not find the post that stated where you purchased your new
Could you give me the name and contact info?
Amel Super Maramu #376 Kimberlite
[mailto:email@example.com] On Behalf Of amelliahona
Sent: Thursday, June 22, 2006 11:52 PM
Subject: [Amel Yacht Owners] Re: watermaker
The first posting was of my actual measurements of the old O-rings as
removed. I measured these with a digital micrometer. I then took the
used O-rings to HydraPak and asked them for matching the O-rings.
The closest O-rings they could come up with where those I posted in
message 2291. The HydraPak O-rings fit well and appeared to be
correct for my membrane end caps and associated parts.
The FilmTec technical bulletin literature on the Dow Corning FilmTec web
site states that small amounts of silicone lubricant on the O-rings is ok.
I highly recommend their web sit. It has lots of info on membranes,
servicing, care of, and production specs. etc.
eric <kimberlite@...> wrote:
You made 2 postings of the "o" ring measurements which measurements are
Is there a problem with using silicone on the "o" rings in the same area as