Re: main out haul furling gearbox shaft


seafeverofcuan@...
 

Bill,
     From the many postings over the years, it seems that I was very lucky and a small bearing puller did it relatively easily ( there was some hammering). Somewhere in the archives, you will find a posting were the boom had to be taken to a machine shop.
The learning from all of this, has to be to regularly grease the stainless shaft in the Anderson winch on the boom.
Many of us have also added grease points to the transmission case, but it is a case of a little rather than a lot when servicing.
Regards,
Trevor
Seafever
SM 425
Mexico

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.