Re: [Amel Yacht Owners] Head pump
Ian Shepherd <ocean53@...>
Hi Mike,toggle quoted messageShow quoted text
I have always had the same problem with the forward head only. I have
changed the joker valve several times, but it makes little difference. I am
told by Amel that the pump up pipe enters the holding tank via a swan neck,
so there should not be any back flow unless the tank is faulty. The only
way to test it might be to pour some dye into the tank and see if it finds
its way back to the toilet bowl.
I believe that in my case it is probably only what's in the pump up pipe
that back flows. As the forward holding tank is situated higher above the
bowl in the forward head than the aft, it may be the higher head of fluid
that is causing my problem.
The only way that I find to make the situation more pleasant is to make sure
that the toilet is well flushed after use so that only sea water comes back
into the bowl.
Ian Shepherd SM 414 Crusader
From: Mike Ondra
Date: 9/15/2006 2:04:42 AM
Subject: [Amel Yacht Owners] Head pump
We are persistently getting backflow of waste water through the check valves
back into the toilet bowl, enough sometimes to fill the bowl. Besides being
unpleasant at anchor, this can be a mess under sail. I would presume (and
hope) this volume represents the waste water from the riser tube only and is
not siphoning out of the holding tank somehow leaking back through the
tricuspid check valve as well as the flapper valve in the pump assembly.
New valve and flapper seemed to retard the problem for a short time only.
Does anyone know what the riser tube looks like inside the holding tank.
Does it simply extend to near the top of the holding tank with an open end
inches below the top of the tank? Or perhaps there is a 180 deg elbow on
Have other faced this and discovered the problem and solution?
Aletes - SM 2000 #240