Re: [Amel Yacht Owners] Grounding


VLADIMIR SONSEV
 

Hi Paul,
You don't have to remove ground sintered plate for cleaning.
I just brushed on vinegar on the plate and brush it again with brass brush. It worked well. You can use some other well deluded acids.
Check all ground connects to the rudder.
Good luck to you.

On Mar 1, 2016 6:41 AM, "osterberg.paul.l@... [amelyachtowners]" <amelyachtowners@...> wrote:
>
>  
>
> Hello!
> Jean-Pierre
> The intention is to connect the SSB to the provided ground the sintered plates on the skeg.
> I have now identified that one of the YG cables attached to the bilge ground strap also was connected with the copper strip in the after lazaret. That's good, but it looks as the sintered plates have been neglected for a long time i.e a lot of deposit in the pors, when testing with my multimeter by putting the probes to the sintered plates it gives no indication of conductivity, Which I guess they should have given. further they seam to be stuck I can't loosen the screw else I would put them in White vinegar.
> PAUL on S/Y Kerpa SM#259 
>
>

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.