Re: [Amel Yacht Owners] Re: Gas struts for engine room hatch
Alexandre Uster von Baar
Good memory Kent,toggle quoted messageShow quoted text
I purchased 2 from
Bansbach easylift in Florida 321-253-1999
Esteban Contreras firstname.lastname@example.org
A1A1N40-250-608/400N 316L Stainless Steel
Meaning a stroke of 250 mm with 608 mm overall
400 NM resistance
The stroke is 8 mm
The Diameter of the cylinder is 19 mm
With 8 mm hinge on each side.
Took a few weeks to build
They were $125 each (and free shipping).
These were the highest standard they are, guaranty for 10.000 opening...
They also had a cheaper standard line.
SM2K #289 NIKIMAT
Club Nautico de San Juan, Puerto Rico
On Mon, 6/20/16, Kent Robertson email@example.com [amelyachtowners] <firstname.lastname@example.org> wrote:
Subject: [Amel Yacht Owners] Re: Gas struts for engine room hatch
Date: Monday, June 20, 2016, 3:20 PM
Hi Ben,If you look back several
months (maybe a year) I think it was Alexandre posted a
source for these in the US. Stainless steel and very
On Jun 20,
2016, at 8:50 AM, Ben Driver/YAHOO email@example.com
Bill, Did you buy these struts
Ben DriverLa Bella VitaCG
Sent from my
On Jun 20, 2016,
at 6:48 AM, 'Bill & Judy Rouse' firstname.lastname@example.org
My experience is they will last
about 6-8 years...my experience with the original two. I
think you should replace them in pairs...I did not, but that
is another story. Do not over-spec the thrust...they are
rated at N400. There is no maintenance on these except to
keep them clean.
easy to bend one of these if you close the lid improperly.
The proper way to close is to press down on the middle of
the engine room lid.
Phare Bleu, Grenada for a few days
On Sun, Jun 19, 2016 at
11:58 PM, email@example.com
glad that you were able to find swift and competent care for
what must be an excruciating injury. Thank you for sharing
this cautionary tale. I will certainly take even more care
when operating the engine room hatch.
One of my gas struts had been
stepped on by an over-eager Yanmar technician and I had to
replace it. I found that after replacement of the strut
that the hatch gave a much more controlled closure than
before it got bent. I think that these struts may need to
be replaced on some regular schedule. Does anyone have a
suggestion as to how long they should last?
BravaCurrently on the hard in Antigua for