Re: [Amel Yacht Owners] Fresh Water Pump & Circuit - appropriate operating pressure?
|
Bill Kinney <greatketch@...>
David, It's a bit hard to answer for sure with out seeing all the bits of your system. Standard fiber reinforced vinyl hose is rated for 125 psi for cold water. Not sure if it's rating for hot water, but I suspect it might be getting marginal. In any event, vinyl hose requires a REALLY hard hand tightening hose clamps by the time you get to 80 psi. Use a small wrench instead of a screwdriver to get the last bit of torque. Faucets and hard plumbed fittings will not have an issue with 80 psi. One of the real problems on a cruising boat with an 80 psi setting is the amount of water you waste, no matter how careful you are. It just comes out faster than you need or can use. The pressure switch on our (non-AMFA) pump was a 60 psi switch. When it failed we replaced it with a 40 and find that totally adequate. In fact it's hard to note the difference. Bill Kinney S/V Harmonie, SM160 Annapolis, MD
On Oct 14, 2016, at 09:37, dbv_au@... [amelyachtowners] <amelyachtowners@...> wrote:
|
|
|