Re: removing imarsat


Gary Wells
 

Ben, I could not do it with the connector on. I had to go with pushing a wire, then a small string first, then lashed the cable and pulled and pushed alternately through the sealant.
I tried digging some of the sealant out and that helped a bit.
It's not ~that~ hard, just in a bad spot to try to reach it.
Ultimately I needed to use a screw-down/crimped gold connector at the antenna. As mentioned, not the best but it's workable and easy to replace if it corrodes.

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.