Re: [Amel Yacht Owners] Impeller Puller Tool


I echo Ian and Judy's response. I recently had the original Onan
water pump rebuilt (1300+ hours on it!) and ordered a new pump also.
The old/original pump was chewing up impellas. Pulling the pump off
requires only undoing of 2 bolts and the hoses attached. If the
impella is broken, its easy to check the hoses for loose fragments,
put the spare pump on, and change the old impella at your leisure.

--- In, "Ian & Judy Jenkins"
<ianjudyjenkins@...> wrote:

There is an alternative, really simple, means of accessing the Onan
1. Simply disconnect the two water pipes ( by loosening the two
clips and pulling the pipes off the pump)
2. Undo the two bolts which attach the pump to the engine. There is
no seal
between the pump and the engine but the first time you detach the
pump you
may have to give it a tap to part it from the engine.
3.With the pump now free you can sit in the cockpit with it, pour
yourself a
beer and withdraw and replace the impeller at your leisure.
The only downside is that your excuse for colourful language and
knuckles is somewhat reduced.
cheers, Ian and Judy Jenkins, Pen Azen, SM 302, Uruguay

From: "gwollenberg" <bozocinq@...>
Subject: [Amel Yacht Owners] Impeller Puller Tool
Date: Thu, 27 Sep 2007 12:35:59 -0000

I am looking for information on who to contact to acquirer the Impeller
Puller Tool shown in the photo section. Thankyou

Yahoo! Groups Links

Got a favourite clothes shop, bar or restaurant? Share your local

Join to automatically receive all group messages.