Re: [Amel Yacht Owners] Watermaker hoses


Bill & Judy Rouse <yahoogroups@...>
 

Pat, 

The original hose from Dessalator was normal hydraulic hose. I think that you are fine with it. 

I used hydraulic hose with machine-crimped stainless steel fittings. Mine had 3/8" JIC Stainless Fittings with, I believe 3/8" high pressure hose. You can use easier-to-find larger hose with your 3/8" fittings. Think about buying some stainless steel JIC "elbow" fittings to make the install neater.

Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School  http://amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970









On Sun, Aug 20, 2017 at 9:43 PM, 'sailormon' kimberlite@... [amelyachtowners] <amelyachtowners@...> wrote:
 

I went to a hydraulic shop and had them make me the hoses with  swage fitted SS Aeroquip fittings.

They had food grade hose in stock. Impossible to leak.

Fair Winds\

Eric

 

 

From: amelyachtowners@yahoogroups.com [mailto:amelyachtowners@yahoogroups.com]
Sent: Sunday, August 20, 2017 8:08 AM
To: amelyachtowners@yahoogroups.com
Subject: [Amel Yacht Owners] Watermaker hoses

 

 

I have tried to find a source locally for food grade hose clad in the stainless steel cover , but have not been able to find it. Is there someplace I could order/purchase this hose ? The fitting has a bad leak .

Thanks,

Pat SM#123


Join main@AmelYachtOwners.groups.io to automatically receive all group messages.