many thanks for your replay. I have red what Mr. Potter wrote.
The produkt I ordered is from Gisa Tex and they write on their speks:
Areas of use
GISA TEX Isotherm and GISA TEX Isotherm Kaschiert, in soft napa
quality with classic grain effects, can be employed both as a premium
upholstery material and as a high-grade wall or ceiling covering. A
top class product.
The surface material of PVC gives the product the necessary
waterproofing and resistance to mould, but also a look of luxury.
This material can cope with the demands of long-term use. The high
quality fleece backing layer is a great advantage when gluing and
serves as thermal and sound insulation.
The specification GISA TEX Isotherm Kaschiert additionally has 5 mm
of thermal foam and a layer of charmeuse (artificial silk) on the
back. This makes it an outstanding material for wall and ceiling
irregularities are covered up and the isulation value raised.
Instructions for use
GISA TEX Isotherm utilized as a wall covering is first roughly cut to
fit the space. The wall alone is coated with an emulsion adhesive. We
recommend the use of our type 1805 adhesive with a lambskin roller.
The fabric strips can then be directly applied to the layer of
adhesive and smoothed out carefully
Do you think this will be the wright product?
--- In firstname.lastname@example.org, "Lars Knudsen" <museum@...>
way, I have the exact same problem in my Santorin 1993 and isconsidering
how to best handle it.this job -
and in fact advice to let professionals do the job as it requiresspecial
breathing equipment and splitting most of the boat interior. But Ihave read
some remarks and also seen posts from a family who did the same jobduring a
stop in Turkey where the boat was on the hard.to not
have the same problem in ten year forward. Amel is now using somekind of
felt-backed vinyl lining instead of the old with rubber foam. Doesanyone
have the specs and name/number on this material in the right colour?it so we
not risk the lining coming down again after a short while.?far
as I know there is nothing else to do then stripping off the oldone,
scratching away the old rubber and glue and apply new glue andceiling.
I'm shure it will be a dirty hard work.it.
stripsAmels and have solved the problem with fore and aft mahogney
butthewould like to know the full repair procedure should I chose to do
proper repair, if there is one.