Is it correct that the bow thruster on the Super Maramu is 500 Amps? And that is at 24 volts? The thruster on my Maramu has a 100 amp breaker installed by Amel ( it has never tripped so I assume the normal draw is something below 100 amps) and the voltage is only 12 volts so if my math is right it is about 1.5 hp which is good up to about 15 knots or so. 500 Amps at 24 volts would be about 16 hp? Can you tell me the size of the original Amel breaker that is installed on the Super Maramu?
Thanks for all of your past help with my Amel. And to update you on the bow thruster leakage. After replacing the seals as instructed, the thruster did not leak at all this season. The thruster has also been 100% reliable thus far and is a tremendous asset IMO.
I will con
sider adding some inline fuses to my boat as well just in case of a major short.
SV Sueno, Maramu #220
I agree with Alan's point and before we sold BeBe I had decided to place 6 of the Blue Sea 5191 MRBF Terminal Fuse Blocks with a removeable Blue Sea BS5185 (150A) amp fuse on each of the 6 positive battery pairs on the positive post of the battery and connect the the positive lead for each pair to the newly installed terminal block fuse. My assumption was that the 500 amp bow thrust
er would not burn individual 150 amp fuses...I may be wrong on this. The fuses are available from 50 amps to 300 amps. Since the fuses are replaceable, I was going to buy extras.
Of course, I have not tested this, so I cannot say that it works and/or whether it is the best solution.