Re: [Amel Yacht Owners] What to do with the hole...



Sorry I am late in responding to this.  I missed it as we were sailing...

My plotter (A B&G Zeus touch 12) has a NMEA0183 input that is connected to the Hydra output.  The plotter converts the NMEA0183 data and retransmits it on the NMEA2000 bus.  

There are devices you can buy that will do this if your plotter can not.  The ones I am familiar with are made by a company called Actisense.

Bill Kinney
SM160, Harmonie
LMC, Fort Lauderdale, FL

---In amelyachtowners@..., <heinz@...> wrote :

Hi Bill 
I'm about to install a new plotter. Where and how did you connect NMEA 0183 to NMEA 2000? There are any photos. 
Thanks in advance 
With kind regards 
Heinz SM2000 Quetzal Nr. 292

Join to automatically receive all group messages.