1. AmelYachtOwners | Main
  2. Messages

Re: [Amel Yacht Owners] Bow Thuster Control Box

Chuck_Kim_Joy
 

Ok a bit more clarification trying not to repeat myself. When the helm command is disconnected the ram can be lowered and raised directly from the power supply in the BT compartment. All three sensors light correctly. When connected back up and commanded from the helm I get this. Command up ram works, sensors work and ram works. Command down and buzzer immediately buzzes and but no sensor light and no ram movement down. Any ideas what else to look for in this circuit.

Thx,
Chuck
s/v Joy

On Thu, Nov 30, 2017 at 3:00 PM, clacey9@... [amelyachtowners] <amelyachtowners@...> wrote:
 

Hi All,

I have been stricken with the dreaded bow thruster burn up! This has happened to a few of you so I am reaching out because we are stuck for a fix. The usual story - Hole in BT is sitting slightly higher than the pin-lock. The up-sensor was a bit erratic and probably allowed the BT to go up to high and jamming the up-down rod. My model does not have a fuse and sure enough we burnt up the motor. I now have a shiny new fabriqué en France motor and it is installed. When commanding the motor to go up from the helm it goes up. When commanding to go down it buzzes like it is already down. Rod does not move down. We are thinking it is one of the orange relays on the circuit board. We changed the diodes out to be sure it was not them. Does that sound right? Any ideas would be appreciated. We are trying to leave and this is keeping us dockside. Thanks in advance.

Chuck

s/v Joy

SM2K #388

 
Join main@AmelYachtOwners.groups.io to automatically receive all group messages.