1. Messages
  2. [Amel Yacht Owners] can't open saloon floor panels

Re: [Amel Yacht Owners] can't open saloon floor panels

Ryan Meador
 

There aren't any hinges; all of the panels lift out.

I also just this evening realized that the panel outboard of the table is stuck too, but the ones directly beneath the table are easy to open.

Thanks,
Ryan
SM 233 Iteration
Boston, MA, USA



On Dec 2, 2017 12:34 PM, "Danny and Yvonne SIMMS simms@... [amelyachtowners]" <amelyachtowners@...> wrote:
 

Hi Ryan,

Have you checked the hinges,

Danny

SM 299 Ocean Pearl

On 02 December 2017 at 11:51 "Ryan Meador ryan.d.meador@... [amelyachtowners]" <amelyachtowners@yahoogroups.com> wrote:

 

 

Hi all,
My SM has the wooden floor panels, not the blue ones.  A while after I bought the boat in the beginning of August, I noticed the smoothly-opening floor panels that run the length of the saloon were taking some effort to open.  I chalked it up to humidity.  But it's been getting worse, to the point where I now need to use a tool to grab onto the holes to lift them as my fingers aren't strong enough.  None of the other floor panels on the boat are affected.  My hygrometer has been reading 45-55% for the last few weeks (since I started paying attention) so even if it was humidity, I would have expected them to dry out again by now.  The temperature has dropped a bit, but I've been keeping the boat heated.  The panels are properly aligned with the rubber stripes in the floor.  Any idea what has happened?  I'd rather not shave them down without understanding it.

Thanks,
Ryan
SM 233 Iteration
Boston, MA, USA

 


 
Join main@AmelYachtOwners.groups.io to automatically receive all group messages.