Re: [Amel Yacht Owners] electrolysis on jib furling gearbox?
toggle quoted message Show quoted text
I have one end of this grouper permanently attached to the bonding at the fuel fill bonding clamp.
As soon as I pull into a marina I always drop it over the side. I had to rig a line to the groupers cable so there was not stain on the wire. You would be surprised how quickly the grouper gets dissolve in some marinas.
Kimberlite Amel Super Maramu #376
From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Wednesday, January 10, 2018 11:40 AM
Subject: RE: [Amel Yacht Owners] electrolysis on jib furling gearbox?
While you are waiting to install a galvanic isolator, consider buying an additional easy to install (i.e. no haul out required) sacrificial anode like this one or similar: https://www.amazon.com/Martyr-CMGROUPERZ-Alloy-Grouper-Hanging/dp/B001TK98LM
It can be connected to the green/yellow bonding wire at a terminal in the Aft locker and then just hung off the back of the boat. It will give you some additional protection of your underwater metal until you get the issue sorted.
SM #440 Cara
Deale, MD USA