I was hoping for better news, but I am worried that your posting is the
most likely explanation. How did you know the electronic control board
was blown? Is it obvious by inspection; can you test for it; or does it
take specialized test equipment?
Where did you get the replacement part from?
Thanks for taking the time to post.
--- In email@example.com, "Jean Boucharlat"
Alternatively, and I do hope this is not the case with you, it could
current frequency. It happened to me in Hawaï where the washing
on shore power at 60Hz (as opposed to the European 50Hz it's
work on) and blew its electronic control board. I had to change the
board, located, if my recollection is correct, at the bottom
of the machine.
Formerly : Satchimi SM 232
De : firstname.lastname@example.org
[mailto:email@example.com] De la part de Frank Newton
Envoyé : lundi 28 avril 2008 15:50
À : firstname.lastname@example.org
Objet : RE: [Amel Yacht Owners] Thomson Washing Machine
It could be a voltage issue.
The same happened to me here in one of the Caribbean islands
where the shore voltage was insufficient.
If the problem has manifested itself on shore power try running
off your generator.
Hope this solves your problem.
Bootlegger of Mann
From: Stephan Regulinski [mailto: <mailto:stephreg%40yahoo.com>
Sent: 28 April 2008 06:29
Subject: [Amel Yacht Owners] Thomson Washing Machine
Does anyone have the repair manual for the Thomson Australe 3 washing
machine (used on the SMM)? Mine will not start. I push the start
button, the red light comes on, then nothing: no water, no mechanical
sounds, no electrical sounds, nada. A few seconds later the red light
Delos (SMM #303)
[Non-text portions of this message have been removed]