Re: [Amel Yacht Owners] Quick question on desalator membrane replacement

Mark Erdos



Oops. I forgot this part but it look like you already have the ends off.


Disconnect the high pressure hoses and separate the 2 pressure vessels. Be very careful not to damage - twist, or enlarge the holes for the interconnector between the 2 pressure vessels ( at the end opposite the HP hoses). Use water from the pressure water system - a 1/2 hose will clamp over the SS flare fitting. Cover the hole in the end plug with a thumb - turn on the water - once the air is out, the end plugs will come out easily - apply a little resistance to balance the 2 ends so that both ends get started out.



With best regards,





Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Martinique


From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Saturday, January 27, 2018 4:37 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Quick question on desalator membrane replacement



If someone who has any experience changing membranes could watch this video and give me any quick advice I would be hugely appreciative

The question surrounds which end of the membrane (ie the O ring end on the membrane) corresponds to regarding the fitting end in the Kevlar sleeve and especially to the tube fitting end. The hydrolic end or the Bobbin end?
Very much appreciated!!!!

Porter McRoberts
Amel 54-152

Excuse the errors.  
Sent from my IPhone

Excuse the errors.  

Sent from my IPhone 

Join to automatically receive all group messages.