Re: [Amel Yacht Owners] Jib Track Plugs


I just checked my McMaster order.
The plug part number: 9545K115
Description on McMaster page:
Size 0 ; 17/32" x 21/32" OD
Without Holes.

Dimensions that I provided before are as measured. Dimensions above are nominal.


On Feb 13, 2018 13:06, "Vladimir Sonsev" <sonsev52@...> wrote:

The plugs have the  following dimensions:
Big OD 17 mm,
Small OD 13 mm,
Length 25 mm
Cut it to 6 or 6.5 mm length.
I thoroughly cleaned the cavities, applied grease on the screw head, and then plugged it. It works good. 

I don't have PN now. I will try to get PN when I have good WiFi connection. I am in D'Arlet, Martinique now.

202 258 1916

On Feb 12, 2018 09:49, "'sailormon' kimberlite@... [amelyachtowners]" <> wrote:

Hi Alexandre,

The one that AMEL sent me are too big for my track.

Fair Winds




From: amelyachtowners@...m []
Sent: Monday, February 12, 2018 8:29 AM
To: amelyachtowners@...m

Subject: RE: [Amel Yacht Owners] Jib Track Plugs



Good morning Eric,

They cost 0.10 Euro from Amel

Sincerely, Alexandre

On Mon, 2/12/18, 'sailormon' kimberlite@... [amelyachtowners] <> wrote:

Subject: RE: [Amel Yacht Owners] Jib Track Plugs
To: amelyachtowners@...m
Date: Monday, February 12, 2018, 6:46 AM


Vladimir,Do you have the part
WindsEricKimberlite Amel Super
Maramu #376    From: amelyachtowners@...m
Sent: Monday, February 12, 2018 6:57
Subject: Re: [Amel Yacht Owners] Jib
Track Plugs    I used back rubber plugs. I
cut them shorter. I installed them 2 years ago. I see no
problem yet. You can buy them from McMaster
very inexpensive.Vladimir
345 "LIFE IS GOOD"  On Feb 10, 2018 16:13,
" <>
 Last year we replaced all the plugs
that keep water from sitting in the recesses around the
bolts that attach the jib track to the rail.  We ordered
them from Amel, and I was disappointed to find that they
were natural white polyethylene—not something I expected
to have a reasonable lifespan in sunlight.  Sure enough, a
year later they are all crumbling
anybody found a better alternative?  Maybe black plastic?
 or anything else better able to handle sunlight? I
haven’t been able to track anything
the absence of a better alternative, I am thinking of
plugging the holes with silicone sealant.  Yes, it would be
something of a pain (but not impossible) to extract if I
ever needed to, but I really don’t want these bolts
soaking in salt water constantly.
 Bill KinneySM160, HarmonieFreeport,

Join to automatically receive all group messages.