My Santorin (Nga Waka) is 1991 and 46 feet so I guess similar to your vessel
On purchase the boat was down in the bow, it transpired that the drain hole was full of dirt and had blocked up! Draining the locker produced a lift
The chain was very rusty so I took it out and replaced it with 120 m of 10 mm Italian made chain, the best quality I could find in NZ at the time
It and the35 kg anchor held fast through the entrails of 3 tropical cyclones at different locations in NZ’s north islands in the past 2 months
In practice 100 m of chain might make more sense as the chain is inclined to accumulate under the lofrans in the chain locker, blocking the flow which then necessitates going below removing the inspection plate and flattening the chain so the remainder can drop in
Mindful of the condition of the locker I inherited we block the chain and hole under the lofrans with plasticine or modelling clay before heading to sea
We also find that removing the inspection port allows the locker and chain to dry
Finally we use a snug chain as a security back up and also at anchor so the boat swings on rope across the bow fair lead
Apologies if I’m telling you to suck eggs
Hello fellow Amelians
Many thanks to all those on the forum who have given their thoughts and experience on anchoring options for my boat
(Currently 50m 12mm chain on older 46ft Maramu and I’m wondering about either adding more length in chain or rode)
I’d really like to hear from those with chain plus rode extension solutions.
what windlass do you have and how do you swap from chain to rode on the windlass when raising and lowering the anchor ?
I spoke to the Lofrans distributor in the uk which ended up raising more questions for me.
He was clear to point out that my Tigres is an all chain windlass the rope capstan is only for independent use and not setup to the allow transfer from chain to rope sections.
He said the chain stripper would cause problems with the rode.
If I want a chain plus rode solution I would need a different windlass.
Any experience most welcome as I’ve only ever had an all chain solution before.