Good day Amelians
Has anybody run the adventure to take apart the 14x150 mm SS axel from the top of the main mast where the back stay fitting is attached ? I foud it well "welded" to the aluminum support and after several days of corrosionX , plastic hammer and drill in Hammer mode , it does not moves at all. Back stay and Maroquin are taken apart and their fittings that stay on the mast mouves freely now . Next step , heat and the previus steps.
Any tip could help and would be greatly apreciated. Thank you in advance.
S/V Sunny Side
At Todomar Yard Cartagena