Re: [Amel Yacht Owners] engine cruising RPM

Courtney Gorman

Cheers Porter enjoy 

On Jul 7, 2018, at 7:26 PM, Porter McRoberts portermcroberts@... [amelyachtowners] <amelyachtowners@...> wrote:


Courtney!  We’ll get there too fast!  

Thanks again

On Jul 7, 2018, at 1:49 PM, Courtney Gorman Itsfun1@... [amelyachtowners] <amelyachtowners@...> wrote:


Porter both Joel and Bill told me to run my engine max 1 hr out of every to to keep it and the turbo happy 

I just wait until I want to hurry then kick ass 
Not fuel efficient but if everything else stays happy then........
Same with cars run them hard sometimes or they have issues 
sv Trippin 54 #101

On Jul 7, 2018, at 11:36 AM, John Clark john.biohead@... [amelyachtowners] <amelyachtowners@...> wrote:


Hi Ryan,
  TAMD22 with fixed prop,  at survey with fresh bottom and clean prop we maxed out at 2700rpm and 7-8 knots.  19 no later waiting for haul out and fresh paint we are maxing out around 2400 rpm and 6.5 kts.  Prop had some groth that a diver scraped a few months ago...probably not the cleanest prop at the moment.

SV Annie
about to run south from Beryl....

On Fri, Jul 6, 2018, 2:36 PM Ryan Meador ryan.d.meador@... [amelyachtowners] <amelyachtowners@...> wrote:

Hi all,

I've dug through the forum history on the topic of the "correct" RPM range for the Super Maramu, and I haven't quite found what I want.  What I have learned is there probably is no single, correct answer -- it depends on the engine and the prop.  But what I really want to know is not what RPM I should be seeing at wide open throttle, but what RPM I should be cruising at?  By this I mean the RPM you would use if you needed to motor for a long period of time.  If the max RPM is different for everyone, it stands to reason that cruising RPM should also be different for everyone.  Is there some way of calculating this RPM from the max?  I've heard a rule of thumb of 80% of max RPM, but given that some of our engines are "over-propped" by design, I don't know if it applies, or even if it's a good rule in the first place.  Should we rev to whatever is necessary to go a certain speed?  Is there any harm in operating the engine close to/at wide open throttle for extended periods of time?

For the record, I have a Volvo TMD22 (B?)...  I typically cruise at around 2400rpm, which yields a boat speed of about 6.5kts.  I have a fixed three-blade prop (probably the original spare).  I think the boat went faster at this RPM last year when I first bought her, but that could be me misremembering the RPM, or the tachometer going out of calibration, or the fact that I badly need a bottom job (though I had it scraped only a couple weeks ago).  I do not know my max RPM; my engine needs a new timing belt and I don't think it's prudent to stress it until that is replaced.  The fastest I've gone is about 2600 and I'm sure it can go higher.  I saw around 7.2kts STW at that speed.

Ryan and Kelly
SM 233 Iteration
Boston, MA, USA

Join to automatically receive all group messages.