Re: [Amel Yacht Owners] Re: SM Running Rigging

Danny and Yvonne SIMMS

Hi Bill.

I like your mizzen traveler set up. I wish it would move from my nice to have list. Trouble is all on the must have list gets priority.



SM 299 Ocean pearl

On 09 August 2018 at 03:11 "greatketch@... [amelyachtowners]" <amelyachtowners@...> wrote:


On any lines working with an Andersen Line Tender you'll need to follow Andersen's insistance

and use 12 mm line. This is the mainsail outhaul line, and the mainsail traveler line.

The story is that the 10 mm line used by Amel was bigger and better than everybody else's 10 mm line.  But whatever the cause, in my experience, if you go to your local chandlery and buy 10 mm line as specified in the Amel documents, it WILL slip under load.
I installed one of these Andersen Line Tenders as part of my mizzen traveler upgrade.  (one of the best things I did to the boat!) When I first installed it I used 10mm lines because that is what Amel documents specified for the identical application on the main traveller...  they didn't work. When I actually measured the main traveller lines, they were 12 mm OD not 10mm.  Swapping up to 12 mm line solved the issue.

Bill Kinney
SM160, Harmonie
Annapolis, MD, USA

---In amelyachtowners@..., <karkauai@...> wrote :

Thanks, Miles.  I hope you’re having a good Summer.

  I think I have a good picture of the manual furling rig in my mind.  Makes sense to use the same line as the one to drop the main sail.  Do you know if it’s 10 mm? 12mm?

The lists of SM rigging already have lines listed for the outhaul and traveler and jib car lines.  Yes, same material, but I guess 12mm may be what’s recommended now instead of 10mm.  So the “Tack Line” is listed as something different.  Still trying to guess what they’re talking about.

I’ll post pics of everything when the upfit is complete.

Hi to Carol.
SM 243





Join to automatically receive all group messages.