Re: [Amel Yacht Owners] Generator exhaust


 

Are you installing an isolated ground generator?

Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus

Amel School  http://www.amelschool.com
720 Winnie St
Galveston Island, TX 77550

+1(832) 380-4970

Any opinions and conclusions expressed in this message are solely those of the author and should not be construed as representing the opinion of an expert. Manufacturers' and Expert's precautions must be considered when dealing with mechanical and/or electrical systems to ensure that you are NOT harmed, and/or the device and/or system is NOT ruined. If in doubt, do not touch any mechanical and/or electrical device or system referred to above.


On Sat, Aug 11, 2018 at 11:22 PM michael winand mfw642000@... [amelyachtowners] <amelyachtowners@...> wrote:
 

Hi, I am installing a new genset into a super maramu 2000.

The engine is a kubota with a 50mm hose going to the vetas water lock. On the outlet of the water lock the hose reduces to 40mm. This is how the original is installed. It has a reducer 50 to 40mm glued  into the water lock.

Can anyone help with the reasons why the hose is reduced in diameter? 
The generator supplier  advised to have a 50mm hose going on the water lock outlet. 
Thanks 

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.