Re: [Amel Yacht Owners] Grease for oil seals


 

Craig,

My answer was appropriate.

Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus

Amel School  http://www.amelschool.com
720 Winnie St
Galveston Island, TX 77550

+1(832) 380-4970

Any opinions and conclusions expressed in this message are solely those of the author and should not be construed as representing the opinion of an expert. Manufacturers' and Expert's precautions must be considered when dealing with mechanical and/or electrical systems to ensure that you are NOT harmed, and/or the device and/or system is NOT ruined. If in doubt, do not touch any mechanical and/or electrical device or system referred to above.


On Thu, Sep 13, 2018 at 8:42 PM sangaris@... [amelyachtowners] <amelyachtowners@...> wrote:
 

Bill - believe that was Pat#123's question.



---In amelyachtowners@..., wrote :

Craig,

I suggest sticking with waterproof grease, unless you find out specifically what type of silicone grease Amel has been using lately in Martinique. There are many different kinds of silicone grease.

Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

On Wed, Sep 12, 2018, 20:14 sailw32@... [amelyachtowners] <amelyachtowners@...> wrote:
 

I am going in install three new oils seals and a new wear bushing . I have for years been using wheel bearing grease,I have never had any leaks. However, I saw a mention of silicone grease being used. Would that be better ,is this what is supposed to be used?

Thanks,

Pat 

SM#123

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.