Re: [Amel Yacht Owners] Isotemp Basic with double engine water coils

Mark Pitt

Thanks to all those who commented on this.  I will be going ahead and will let you know how it works out.

  Mark Pitt

  Sabbatical III, SM #419, Lanzarote, Canary Islands

On 9/20/2018 2:49 PM, Bill Rouse brouse@... [amelyachtowners] wrote:


I was going to do exactly that, but the wrong water heater was shipped and I replaced the water heater with 1 circuit. I would recommend that any SM, 54, 55, etc owner replacing the water heater use the 2 circuit model designed to accept coolant from two seperate engines.


CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

Any opinions and conclusions expressed in this message are solely those of the author and should not be construed as representing the opinion of an expert. Manufacturers' and Expert's precautions must be considered when dealing with mechanical and/or electrical systems to ensure that you are NOT harmed, and/or the device and/or system is NOT ruined. If in doubt, do not touch any mechanical and/or electrical device or system referred to above.

On Thu, Sep 20, 2018 at 6:51 AM mark_pitt@... [amelyachtowners] <amelyachtowners@...> wrote:

I am planning to replace my 15 year old Isotemp Basic 40 liter hot water heater with a new Basic 40 that has two engine water coils.  The intent is to connect the Onan cooling circuit to the second coil in the Basic hot water heater.  Has anyone done this?  Are there some issues I need to be aware of?  In particular, I am concerned whether the coolant pump on the Onan can deal with the longer hose runs and extra coolant.  Nothing has come up in a Google search.


Mark Pitt

Sabbatical III, SM#419

Lanzarote, Canary Islands

Join to automatically receive all group messages.