Hi Bill,

yes I tried to get Kevlar and had to take dyneema 12mm. I fitted it very tightly but useless, as soon as the breeze came up it slipped dramatically. I agree with you about it diminishing in diameter but I think the casing is very slick too. It would seem 14mm might be a try but I doubt if it will work. 

Regards

Danny

SM 299 Ocean pearl

On 01 November 2018 at 07:37 "Bill Rouse brouse@... [amelyachtowners]" <amelyachtowners@...> wrote:

 

 

Danny,

Amel used Kevlar 10mm on the SM. It is nearly impossible to find.

Amel suggests 12mm Dyneema:

The issue was not with the strength because Dyneema line is stronger than Kevlar. The issue is that most rope manufacturers are taking fiber from the middle of the rope and 10mm isn't really 10mm anymore. I purchased some 10mm that I could squeeze with my fingers to 7mm. Look at the Anderson Line Tender. You will see that if you can squeeze 10mm to 7mm, the line will certainly slip.

Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School  http://www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

My Calendar 

On Wed, Oct 31, 2018 at 12:31 PM Danny Simms sailorman.ds@... [amelyachtowners] < amelyachtowners@...> wrote:

 

 

Hi All,

A little while ago a number of you posted on replacing the control line for the mainsail out haul. I remember dyneema was not successful. Can some one remind me of what type was the best.

Regards

Danny

SM 299 Ocean Pearl