Re: [Amel Yacht Owners] Re: mizzen furler failure

Danny and Yvonne SIMMS
 


---------- Original Message ----------


Hi,

I wonder if the addition of a grease nipple to this ala furler drive gearboxes would be an option. For the main also. Just need to know where to drill into a void. I,m referring to the gearbox, not the input shaft. 
Regards

Danny

SM 299 

Ocean Pearl 

On 05 November 2018 at 02:24 "sailor63109@... [amelyachtowners]" <amelyachtowners@...> wrote:

 

What would be the preventive maintenance procedure for this gearbox?  


From what I understood of this chain:
1) remove the black ring
2) unscrew the outer casing of the horizontal shaft from the vertical gearbox
3) remove the horizontal shaft from the outer casing by pulling forward
4) clean both , removing surface rust and polish
5) lubricate and reinstall

Is it that simple if it is functioning normally?  

Thanks,
Duane
Wanderer, SM#477

 


 


 


 

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.