Re: [Amel Yacht Owners] Cockpit enclosure fittings

Danny Simms

Hi Willem,
Olivier told me the hook on the ends goes in the ring below the mizzen boom and the u shape clamps around the mizzen side stay. It was a system provided by Amel on later model SM
SM 299 Ocean Pearl

On Mon, 12 Nov 2018 at 02:07, Alexandre Uster von Baar uster@... [amelyachtowners] <amelyachtowners@...> wrote:

Good morning Willem,

I had a full cockpit enclosure with the same parts.
Quite frankly I never was fully sure where went where…
It seems the 2 pieces with U shape on one side and little hook on the other were going:
U shape on the shroud (you should have a little round block of metal on the shroud above which that bar will rest) and the Hook on the mizzen (not sure exactly where, on the top, gooseneck, etc.)
If you look closely on the 2nd and 3rd pictures from the bottom you will see for the U shape.

Sincerely, Alexandre

On Sun, 11/11/18, kavanga@... [amelyachtowners] <amelyachtowners@...> wrote:

Subject: [Amel Yacht Owners] Cockpit enclosure fittings [2 Attachments]
To: amelyachtowners@...
Date: Sunday, November 11, 2018, 6:23 AM


Hello fellow Super Maramu
For the winter period I
changed my new summer cockpit sprayhood for the old vinyl
one I still carry on board. This also for het cockpit
enclosure vinyl pieces I have on board. Some are not much
used. In the garage I found 3 stainless steel bars. One just
fits in and has two identical end fittings welded on. The
other two are smaller and are identical with on each end
different fittings. Obviously these are ment to be used for
the cockpit enclosure. I have no idea where to attach these
bars. I hope that some of you has identical fittings for the
cockpit enclosure and will be so kind to inform me. For this
reason I made 2 pictures of the bars and end
fittings.If you have pictures about the
installation of a similar enclosure, that will be great if
you email these to me.

Join to automatically receive all group messages.