Thank you. I got in touch with NZ Dessalator rep, will wait for them to send it and will mention what you said. Do you have any idea how much was yours? 

 

On Fri, 23 Nov 2018 at 17:24, 'sailormon' kimberlite@... [amelyachtowners]

wrote:

 

The Dessalator representative in Maine has both the Calpeda pump and an Iwaki Pump which is much less money that the Calpeda pump. The Iwaki pump works fine for my Watermaker which is the same as yours.

His Email is  Mark Fruehauf info@...

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Thursday, November 22, 2018 6:48 PM
To: amelyachtowners@...; amelyachtowners@...
Subject: Re: [Amel Yacht Owners] Dessalator primary pump.

 

 

Thanks  so much Bill

 

On Fri, 23 Nov 2018 at 12:08, Bill Rouse brouse@... [amelyachtowners]

wrote:

 

Alin,

 

You have the Dessalator  D150/160 water maker. The low pressure feed pump spec is 900 liters/hour. You can buy the exact 230VAC 50htz replacement at www.dessalator.com.

Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

 

On Thu, Nov 22, 2018, 16:42 Alin Misescu alin1923@... [amelyachtowners] <amelyachtowners@... wrote:

 

Hi Alexandre. 

Thanks for your answer. My one is a bit different. Pls see the pictures, I didn't include the primary pump as it is removed. Maybe I will send a picture latter. 

Thanks.

Alin

Error! Filename not specified.

Error! Filename not specified.

Error! Filename not specified.

 

On Fri, 23 Nov 2018 at 9:42, Alexandre Uster von Baar uster@... [amelyachtowners]

<amelyachtowners@...> wrote:

 

Do you have the “DUO D60” (which can be used with 24 Volt or 220 Volt?
You can find some information here:
http://www.nikimat.com/water_maker_duo_d60.html

Sincerely, Alexandre

--------------------------------------------
On Thu, 11/22/18, alin1923@... [amelyachtowners] <amelyachtowners@...> wrote:

Subject: [Amel Yacht Owners] Dessalator primary pump.
To: amelyachtowners@...
Date: Thursday, November 22, 2018, 2:11 PM


 









Hi Amel owners.My
water maker primary pump, the one that sucks from the
strainer and sends water to the high pressure pump, has the
shaft badly corroded and needs replacement. I find it very
difficult to find specs so I can buy a new pump. Can anyone
advise me where to find them?My boat is
a SM 2k, hull 283Thank
you.Alin Misescu, SM2K, Wanderer,
#283