Re: [Amel Yacht Owners] Re: shaft seals
Since I've got a 1992 boat, that must explain why my drawings show the 2 x 12 mm.
Thanks for the clarification.
Cheers, Craig SN68
---In amelyachtowners@..., <atlanticyachtsurvey@...> wrote :
Hello Bob, Craig and Bill(s),
AMEL indeed made an experiment (maybe around 1992) of 2 x 12mm seals, with molded in springs, but they were too stiff and the result was not as good as the three seals solution (with open springs stuffed with silicone grease). The third seal working as a potential back-up.
Keep the three seals...
On Tuesday, December 11, 2018, 1:24:02 AM GMT+1, sangaris@... [amelyachtowners] <amelyachtowners@...> wrote:
Actually, I saw that notation on the original Amel drawing of the "C" drive, viz., either 3 each of 45 65 8 or 2 each of 45 65 12.
Hey! We should check with Brother Jose Venegas to see how his experiment with reorienting the seals is coming.
---In amelyachtowners@..., <brouse@...> wrote :
It is true that two wider seals will fit, but you will lose the double protection of losing oil that was designed by Amel.
You know me...stick with the original design unless it is an emergency, or you have personally cleared your planned change with Captain Amel. And, yes I spoke with the Captain about a solar Arch with the help of a Romanian and a funny looking board.
CW Bill Rouse
Admiral, Texas Navy
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550