Re: [Amel Yacht Owners] The Mechanics of Battery Equalization
toggle quoted messageShow quoted text
I have a Victron Skylla-i 24v/80A charger for the last 3 years. So far very happy with it. It has equalization cycles that can be automatic, or only manual. I chose the manual because I want to know when the voltages are over 30 as recommended by my battery company. There are several preset modes depending on your battery type, and an adjustable setting where you can set your Abs and Float voltages. On that setting, the equalization voltage is Abs Voltage plus 3.6V, limited by Amperage to 25% of 80 Amp max with my charger (or how ever you set the max), or 4 hours. So if Amperage reaches 20A during equaliation, the voltage will drop to the point that gives 20A charging.
Hope that helps,
Kent & Iris
Still in Ft Lauderdale waiting for faucet parts...Ugh.
Sent: Saturday, January 26, 2019 8:20 AM
Subject: [Amel Yacht Owners] The Mechanics of Battery Equalization
My 50 Amp Dolphin Battery charger (original Amel) suddenly died upon re-commissioning the boat after our hurricane repairs. Having an electronics background I contacted Dolphin for schematics and a parts list which they promptly provided for this 17 year old product, (wow, I was impressed, and when I have a moment I will post those items in the files section). As usual the failed parts were two capacitors (that seems to be the most common failure mode for all things electric on our boats). The exact part number was available and I obtained those and installed them and voila, the beast is alive. The LED indicators also went at the same time, so I found replacements for those cute little rectangular LEDs, replaced them, and checks show everything is working as prior including the multistage charging etc. Total cost about $16.00 US and a day's labor at my exorbitant shop rate of $0.00 per hour. If you actually paid someone to render this repair it would probably be cheaper to buy a new charger.
My chargers don't have an equalization mode so I have been using a DC power supply to equalize pairs (4 pairs) at 31 volts at 5 amps. This is laborious (2 day) process but forces me to carefully watch the process and monitor temps, water levels, specific gravity etc. I also isolate each pair from the boat during the process to avoid any damage to any boat items.
As I considered a new charger (just in case I couldn't fix the Dolphin 50 A), I found that I couldn't find any marine 28 volt DC, 50-60 amp output, input 220-230 volt, 50-60 hertz chargers that have an equalization mode. Blue Sea makes one but it is a max 40 Amp DC output, Mastervolt and Victron don't have any with an equalization mode (at least that I could discover in their literature). So I have two questions for the group:
1. What charger do you have that has an equalization mode?
2. When you do the equalization, how do you isolate the house bank batteries from the boat? (I know that turning off the two large red handles in the quarter-berth companionway turns off most of the power to the boat, but I wasn't certain if there are "sneak, hot battery bus" type circuits that are wired (e.g. inverters, solar panel regulators etc). The chargers do NOT go thru the large red handled shut off switches.
Your thoughts and experiences would be most welcome.
Gary S. Silver
Amel SM 2000 #335
Puerto Del Rey Marina - Puerto Rico